User manual HITACHI CP-RX94

[. . . ] Projector CP-RX94 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] Right side of the menu is blank until a name is specified. (3) Select an icon you would like to assign to the port in the SOURCE NAME dialog. The name assigned to the port will also be automatically switched according to your icon selection. Press the ENTER or INPUT button to determine your icon selection. (4) Select a number you would like to assign to the port along with the icon. You can select the number either from blank (no number assigned), 1, 2, 3, or 4. (5) If you would like to modify the name assigned to the port, select CUSTOM NAME and press the ENTER or INPUT button. (continued on next page) SOURCE NAME (continued on next page) 48 SCREEN menu Item Description (6) The current name will be displayed on the first line. Use the /// buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the and INPUT button at the same time. Also if you move the cursor to DELETE or ALL CLEAR on screen and press the ENTER or INPUT button, 1 character or all characters will be erased. The name can be a maximum of 16 characters. (7) To change an already inserted character, press the button to move the cursor to the first line, and use the / buttons to move the cursor on the character to be changed. After pressing the ENTER or INPUT button, the character is selected. Then, follow the same procedure as described at the item (6) above. (8) To finish entering text, move the cursor to the OK on screen and press the , ENTER or INPUT button. To revert to the previous name without saving changes, move the cursor to the CANCEL on screen and press the , ENTER or INPUT button. Using the / cursor buttons switches the mode for the template screen. Press the cursor (or the ENTER) button to display the selected template, and press the cursor button to close the displayed screen. The last selected template is displayed when the MY BUTTON allocated to the TEMPLATE function is pressed ( 53). TEST PATTERN DOT-LINE1 DOT-LINE2 DOT-LINE3 MAP2 MAP1 CIRCLE2 CIRCLE1 DOT-LINE4 You can turn a map upside down and scroll it horizontally when MAP1 or MAP2 is selected. To invert or scroll the map, display the guidance by pressing the RESET button on the remote three seconds or more when MAP1 or MAP2 appears. SOURCE NAME (continued) TEMPLATE (continued on next page) 49 SCREEN menu Item Description The C. C. [. . . ] MERK · Informasjonen i denne håndboken kan endres uten varsel. · Produsenten påtar seg intet ansvar for eventuelle feil som fremkommer i denne håndboken. · Reproduksjon, overføring eller bruk av dette dokumentet eller deler av det, er ikke tillatt uten uttrykt skriftlig tillatelse. OPMERKING · De informatie in deze handleiding kan zonder voorafgaande kennisgeving veranderd worden. [. . . ]