User manual HITACHI CPS420

[. . . ] CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. TECHNICAL REGULATORY NOTICES ENGLISH Liquid Crystal Projector Liquid Crystal Projector Thank you for purchasing this liquid crystal projector. WARNING · Please read the accompanying manual "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. [. . . ] Select Remote Control Sensor: Select the sensors to activate along the menu with the / button. Use this function if the remote does not work stably. The ambient light may affect the remote. · Strong light and obstacles will interfere with operation of the remote control transmitter. IR REMOTE SETUP INPUT 2 1 1 IMAGE 3 2 3 OPT. VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER IR REMOTE : active : inactive ENGLISH-15 ENGLISH Options Menu OPERATIONS (continued) No Signal Menu The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the "NO INPUT IS DETECTED ON ***" or "SYNC IS OUT OF RANGE ON ***" message while no signal is received. Select an item with the and buttons, and start or stop operation with the and buttons. VOLUME BLANK START UP MIRROR MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER IR REMOTE 16 Table 8. No Signal Menu Item Reduce VOLUME Description Increase · When this function is used, audio input is automatically switched to video. The audio input can be switched by moving the DISK PAD left and right during the display of the volume adjustment bar. The volume adjustment bar is displayed by pressing VOLUME / button. BLANK Select Blank Screen: Select the screen in case of the BLANK mode with the / button. The selected one (MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON. MyScreen is a mode that the customer-customized screen is displayed. This is the blue screen at the factory setting. Refer to the description of MyScreen below. ORIGINAL is a mode that the factory fixed screen is displayed. · When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes. START UP Select Start Up Screen: Select the screen in case of no signal input with the / button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed when no signal is input. My Screen is a mode that the customer-customized screen is displayed. This is the blue screen at the factory setting. Refer to the description of MyScreen below. ORIGINAL is a mode that the factory fixed screen is displayed. TURN OFF displays the blue screen. · When MyScreen or ORIGINAL is selected, the screen is going to the black after several minutes. MIRROR Select Mirror Status: Select the mirror status with the / button. MENU COLOR Select Menu Background Color: Select the color with the / button. LANGUAGE Select Menu Display Language: Select the language with the / button. AUTO OFF Set AUTO OFF: Set 1~99 minutes with the / button. The system automatically enters the standby mode when a signal is not received for the set time. Clear AUTO OFF: Select the STOP (0 min. ) with the button. [. . . ] · Commands are not accepted during warm-up. TECHNICAL - 7 TECHNICAL TECHNICAL (continued) Command data chart Names Operation type Red Orange Green Blue Blank Color Set Purple White Black MyScreen ORIGNAL Get Normal Mirror Set H Inverse V lnverse H&V Inverse Get Set Normal Freeze Get Red Orange Green Menu Color Set Blue Purple Transparent Gray Get ORIGNAL Startup Set OFF MyScreen Get English Français Deutsch Español Language Set Italiano Norsk Nederlands Português Japanese Get BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF Header 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 Command data CRC 3B D3 AB D2 5B D2 CB D3 FB D1 6B D0 9B D0 FB CA FB E2 08 D3 C7 D2 57 D3 A7 D3 37 D2 F4 D2 83 D2 13 D3 B0 D2 7F D3 EF D2 1F D2 8F D3 BF D1 2F D0 DF D0 4C D3 0B D2 9B D3 CB CB 38 D2 F7 D3 67 D2 97 D2 07 D3 37 D1 A7 D0 57 D0 C7 D1 37 D4 C4 D3 Action 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 Type 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 00 30 01 30 01 30 01 30 01 30 01 30 02 30 02 30 02 30 03 30 03 30 03 30 03 30 03 30 03 30 03 30 03 30 04 30 04 30 04 30 04 30 05 30 05 30 05 30 05 30 05 30 05 30 05 30 05 30 05 30 05 30 Setting code 00 00 01 00 02 00 03 00 04 00 05 00 06 00 20 00 40 00 00 00 00 00 01 00 02 00 03 00 00 00 00 00 01 00 00 00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 00 00 00 00 01 00 20 00 00 00 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07 00 08 00 00 00 Freeze TECHNICAL - 8 TECHNICAL (continued) Command data chart Names Operation type Get Magnify Increment Decrement Get Auto off Increment Decrement Brightness Reset Contrast Reset V. Position Reset H. Position Reset H. Size Reset Color Balance R Reset Color Balance B Reset Sharpness Reset Color Reset Tint Reset Keystone_V Reset Keystone_H Reset Auto Set Execute Execute Execute Execute Execute Execute Execute Execute Execute Execute Execute Execute Execute off Blank on/off on Get BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF Header 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 Command data CRC 7C D2 1A D2 CB D3 08 86 6E 86 BF 87 58 D3 A4 D2 E0 D2 IC D3 68 D2 94 D3 D0 D3 C4 D0 80 D0 7C D1 08 D0 98 D8 91 D0 FB D8 6B D9 C8 D8 D9 D8 Action 02 00 04 00 05 00 02 00 04 00 05 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 01 00 01 00 02 00 02 00 Type 07 30 07 30 07 30 10 31 10 31 10 31 00 70 01 70 02 70 03 70 04 70 05 70 06 70 09 70 0A 70 0B 70 0C 70 20 70 0A 20 20 30 20 30 20 30 20 60 Setting code 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 Error Status Get (Example of Return) 00 00 01 00 (Normal) (Cover-error) 04 00 (Temp-error) 02 00 (Fan-error) 03 00 (Lamp-error) 05 00 (Air flow-error) 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 2A D3 BA D2 19 D3 FE D2 3E D0 0E D2 6E D3 9E D3 AE D1 CD D2 31 D3 57 D3 86 D2 06 00 (Lamp-Time-over) 01 00 01 00 02 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 02 00 04 00 05 00 00 60 00 60 00 60 00 20 00 20 00 20 00 20 00 20 00 20 00 20 01 20 01 20 01 20 00 00 01 00 00 00 00 00 04 00 03 00 01 00 02 00 05 00 00 00 00 00 00 00 00 00 Power Set OFF ON Get BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF RGB1 RGB2 Set DVI Video SVideo Component Get Get Volume Increment Decrement Input Source TECHNICAL - 9 TECHNICAL TECHNICAL (continued) Command data chart Names Operation type Normal Mute Get Get Brightness Increment Decrement Get Contrast Increment Decrement Get Color Balance R Increment Decrement Get Color Balance B Increment Decrement Get Keystone_V Increment Decrement Get Keystone_H Increment Decrement 4:3, Full Aspect Set 16:9 Small Get Default Display Position at 16 : 9 or Small Set Bottom Top Get Get V. Position Increment Decrement Get H. Position Increment Decrement Get H. Size Increment Decrement Get H. Phase Increment Decrement BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF Header CRC Mute Set 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 46 D3 D6 D2 75 D3 89 D2 EF D2 3E D3 FD D3 9B D3 4A D2 01 D2 67 D2 B6 D3 45 D2 23 D2 F2 D3 B9 D3 DF D3 0E D2 E9 D0 8F D0 5E D1 9E D0 0E D1 FE D1 AD D0 62 D1 F2 D0 02 D0 51 D1 0D 83 6B 83 BA 82 F1 82 97 82 46 83 B5 82 D3 82 02 83 49 83 2F 83 FE 82 Action 01 00 01 00 02 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 02 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 Command data Type 02 20 02 20 02 20 03 20 03 20 03 20 04 20 04 20 04 20 05 20 05 20 05 20 06 20 06 20 06 20 07 20 07 20 07 20 0B 20 0B 20 0B 20 08 20 08 20 08 20 08 20 09 20 09 20 09 20 09 20 00 21 00 21 00 21 01 21 01 21 01 21 02 21 02 21 02 21 03 21 03 21 03 21 Setting code 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 02 00 00 00 00 00 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 TECHNICAL - 10 TECHNICAL (continued) Command data chart Names Operation type Get Sharpness Increment Decrement Get Color Increment Decrement Get Tint Increment Decrement Auto NTSC PAL Set Video Format SECAM NTSC 4. 43 M-PAL N-PAL Get 1080i HDTV Set 1035i Get off PinP Size Set Large Small Get Upper left Upper right Set PinP Position bottom left bottom right Get RGB Set PinP Audio ch Video Get Video Set PinP Input S-Video Get BE EF BE EF 03 03 06 00 06 00 26 22 75 23 01 00 02 00 02 23 02 23 02 00 00 00 BE EF BE EF BE EF 03 03 03 06 00 06 00 06 00 2A 23 89 22 D6 22 01 00 02 00 01 00 03 23 03 23 02 23 01 00 00 00 01 00 BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 62 72 C1 73 FE 22 6E 23 9E 23 CD 22 02 23 92 22 62 22 F2 23 31 23 BA 22 01 00 02 00 01 00 01 00 01 00 02 00 01 00 01 00 01 00 01 00 02 00 01 00 05 22 05 22 00 23 00 23 00 23 00 23 01 23 01 23 01 23 01 23 01 23 03 23 01 00 00 00 00 00 01 00 02 00 00 00 00 00 01 00 03 00 02 00 00 00 00 00 BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF Header 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 Command data CRC F1 72 97 72 46 73 B5 72 D3 72 02 73 49 73 2F 73 FE 72 9E 75 FE 71 6E 70 6E 75 5E 72 FE 74 0E 71 0D 73 F2 73 Action 02 00 04 00 05 00 02 00 04 00 05 00 02 00 04 00 05 00 01 00 01 00 01 00 01 00 01 00 01 00 01 00 02 00 01 00 Type 01 22 01 22 01 22 02 22 02 22 02 22 03 22 03 22 03 22 00 22 00 22 00 22 00 22 00 22 00 22 00 22 00 22 05 22 Setting code 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0A 00 04 00 05 00 09 00 02 00 08 00 07 00 00 00 00 00 TECHNICAL - 11 TECHNICAL TECHNICAL (continued) Command data chart Names Operation type off Sync on G Set on Get NORMAL WHISPER Set WHISPER Get NORMAL GAMMA Set CINEMA DYNAMIC Get Set off on Get Set off on Get off Set IR Remote Top on Get BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 06 00 AB 22 08 23 C7 F0 57 F1 A7 F1 F4 F0 FF 32 6F 33 CC 32 03 33 93 32 30 33 47 33 D7 32 74 33 01 00 02 00 01 00 01 00 01 00 02 00 01 00 01 00 02 00 01 00 01 00 02 00 01 00 01 00 02 00 00 33 00 33 A1 30 A1 30 A1 30 A1 30 00 26 00 26 00 26 01 26 01 26 01 26 02 26 02 26 02 26 01 00 00 00 00 00 01 00 02 00 00 00 00 00 01 00 00 00 00 00 01 00 00 00 00 00 01 00 00 00 BE EF BE EF BE EF 03 03 03 06 00 06 00 06 00 5B D1 68 D1 3B 23 01 00 02 00 01 00 08 30 08 30 00 33 00 00 00 00 00 00 BE EF Header 03 06 00 Command data CRC CB D0 Action 01 00 Type 08 30 Setting code 01 00 IR Remote Front IR Remote Rear NOTE · The max. 2 IR remote out of 3 (front, rear and top) can be activated. TECHNICAL - 12 REGULATORY NOTICES FCC Statement Warning WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]