User manual HITACHI CP-S860

[. . . ] Liquid Crystal Projector Model CP-S860W/E USER'S GUIDE Thank you for purchasing the Hitachi liquid crystal projector. Please read this user's manual thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. Outline This liquid crystal projector is used to project various computer signals as well as NTSC/PAL/SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Contents Before Use Checking the package Contents Names and functions of each part Installation Basic operations Adjustments and functions Connection to the vido signal terminals Connection to the RGB signal terminal Connecting to the USB Connection to the CONTROL signal terminal Example of system setup Cleaning the air filter Lamp Message table When you think something wrong Specifications About the warranty and after-service Page 3 8 8 12 13 17 22 22 25 26 31 31 32 32 33 34 35 Features (1) Outstanding brightness The UHB lamp and high-efficiency optical system assure a high level of brightness. (2) Partial magnification function Interesting parts of images can be magnified for closer viewing. (3) Distortion correction function Distortion-free images are quickly available. [. . . ] · When a still image signal is input when the FREEZE function is on, make sure not to forget to cancel the FREEZE function. · Cancelled when the menu display is turned on during freeze operation. 15 Basic operations (continued) Magnify function VIDEO LASER RGB Part of an image can be displayed magnified. This function can be used together with the FREEZE function (refer to page 10). STANDBY/ON POSITION 4 5 RESET 1, 2 3 MENU FREEZE 6 VOLUME MUTE MAGNIFY OFF P in P BLANK AUTO TIMER 1 2 3 4 5 6 Press the MAGNIFY + button. · The center part of the image will be displayed magnified approximately two times. Changing the magnification ratio Press the MAGNIFY + button. · When this button is pressed, the image will be displayed even larger. Press the MAGNIFY ­ button. · When this button is pressed, the image will be displayed even smaller. Moving the display area Press the POSITION button. Press the DISK PAD up, down, left and right buttons. · The magnified area will move in accordance with the button pressed. Returning to normal display Press the MAGNIFY OFF button. Caution · The magnify function will be cancelled when the input select button is pressed or the display mode of the PC being used for display is changed. · Cancelled when the magnified display or menu display is on. 16 Adjustments and functions VIDEO RGB LASER STANDBY/ON POSITION 1, 2, 3 2, 3 RESET MENU FREEZE MAGNIFY VOLUME OFF MENU P in P MUTE 3 1 1, 3 BLANK AUTO TIMER FOCUS ZOOM 1 2 3 Press the MENU ( ) buttons of the projector or the MENU button of the remote control. · The Menu screen will appear. (refer to page 18-21 for details. ) Press the MENU ( ) buttons of the projector or the DISK PAD button of the remote control to select the menu item to be adjusted. · The selected menu item will be displayed in green. Press the MENU ( ) buttons of the projector or the DISK PAD button of the remote control to select the menu item to be adjusted. · The selected menu item will be displayed in green. The menu will disappear after 5 - 10 sec. Returning to the initial settings · Select the adjustment item to be returned to the initial settings. · Press the RESET button. 17 Adjustments and functions (continued) SET UP Images and display positions can be adjusted from the SETUP menu. RGB signal input SETUP INPUT IMAGE OPT. Video signal input SETUP INPUT IMAGE OPT. VOLUME BRIGHT CONTRAST V POSIT H POSIT H PHASE H SIZE COLOR BAL R COLOR BAL B 100 100 800 VOLUME BRIGHT CONTRAST SHARPNESS COLOR TINT COLOR BAL R COLOR BAL B Adjustment item VOLUME BRIGHT (BRIGHTNESS) CONTRAST SHARPNESS COLOR TINT V. SIZE COLOR BAL R (COLOR BALANCE Red) COLOR BAL B (COLOR BALANCE Blue) Adjustment description Volume decreases Darker Lower contrast Softer image Weaker colors Redder Volume increases Brighter Stronger contrast Sharper image Darker colors Greener Moves the image up and down. Adjusts the horizontal size of the image. Red Lighter Blue Lighter Darker Darker Using the SETUP Menu Move the cursor to the item to be adjusted and move the MENU button of the projector or the DISK PAD button of the remote control to change the length of the bar display. Caution · Menu setting is not possible while the inital screen ("No input is detected" or Sync is out of range") is being displayed. · Tint cannot be adjusted with PAL or SECAM video signal input. · Tint, color and sharpness cannot be adjusted with RGB signal input. SIZE cannot be adjusted with video signal input. · Menu operation is not possible during magnify or freeze operations. · Displaying the menu cancels magnify and freeze operations. 18 Adjustments and functions (continued) INPUT The INPUT menu is used to select RGB signal sync signal frequency of the monitor and the VIDEO signal. SETUP RGB VIDEO INPUT IMAGE fH:38kHz fV:60Hz OPT. SETUP RGB VIDEO INPUT IMAGE OPT. AUTO NTSC PAL SECAM NTSC4. 43 M-PAL N-PAL Adjustment item RGB VIDEO Adjustment description Displays the following RGB inputs fH: horizontal sync frequency fV: vertical sync frequency Sets the video signal system. When the screen is unstble (no color) or rolls, select the mode that matches the input signal. 19 Adjustments and functions (continued) IMAGE Projection image inversion, etc. , can be selected from the IMAGE menu. SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. KEYSTONE MIRROR BLANK START UP P. IN P. KEYSTONE MIRROR BLANK START UP P. IN P. KEYSTONE MIRROR BLANK START UP P. IN P. NORMAL H : INVERT V : INVERT H&V : INVERT SETUP INPUT IMAGE OPT. SETUP INPUT IMAGE OPT. KEYSTONE MIRROR BLANK START UP P. [. . . ] Possible cause ·The main power switch is not turned on. ·The projector is not correctly connected. ·The projector is not correctly connected. ·The brightness adjustment knob is rotated fully clockwise. [. . . ]