User manual HITACHI CP-SX1350

[. . . ] Projector LENS SHIFT BNG COMPONENT S-VIDEO RGB INTER M1-D INPUT KEYSTONE SEARCH RESET FOCUS ZOOM User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using the product, please read the "User's Manual Safety Guide" and related manuals to ensure the proper use of this product. After reading them, store them in a safe place for future reference. NOTE · The information in this manual is subject to change without notice. · The manufacturer assumes no responsibility for any errors that may appear in this manual. [. . . ] memo This operation may not work well at some signals. a irregular picture, a color lack), please select the suitable mode to the item "VIDEO" of the INPUT menu. 99 minutes) AUTO POWER OFF ENABLE buttons. 0 minute = DISABLE) AUTO POWER OFF DISABLE 0min POWER OFF ex. When the time is set to 1 to 99, the projector lamp will go off and the STANDBY/ON indicator begins blinking when the passed time with a proper signal (without no-signal and an unsuitable signal) reaches at the set time. Please refer to the section "Turning Off The Power". (This table is continued to the following page. ) 1min 29 Multifunctional Settings (continued) AUTO Menu (continued) Item Description Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF When the TURN ON is selected, detecting no signal cycles through input ports and displays the picture of retrieved signal. M1-D SEARCH VIDEO S-VIDEO RGB BNC COMPONENT memo When the TURN ON is selected, pressing the RGB button selects the M1-D ports, and pressing the VIDEO button selects the COMPONENT port. memo If no signal is found or the projector is unstable to find an input signal at any of its ports, it will return to the state it was in prior to the search. Select the EXECUTE using the button to reset the AUTO menu items. : EXECUTE CANCEL The items of the AUTO menu are collectively returned to the initial setting. Note that the item "ADJUST" is not reset. RESET 30 Multifunctional Settings (continued) SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item Description Select a type of the BLANK screen using the / buttons. : MyScreen ORIGINAL BLUE WHITE BLACK The BLANK screen is the screen, which is displayed by pressing the BLANK button. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. The BLUE, the WHITE and the BLACK are the non-pattered (plain) screens in each color. memo To avoid remaining as an afterimage, the MyScreen and the ORIGINAL screens will change to the BLACK screen after several minutes. memo For the MyScreen, please refer to the item "MyScreen" in this table. Select a type of the START UP screen using the / buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. [. . . ] The audio input is not correctly selected when the child window is displayed. Sounds are heard, but no pictures are displayed. The signal cables are not correctly connected. Correctly connect the connection cables. [. . . ]