User manual HITACHI CPX2102MS

[. . . ] TINT Adjust the TINT control for the proper color phase or flesh tones. When turned counterclockwise, the skin tone becomes reddish. When turned clockwise, skin tone becomes greenish. 2. SHARPNESS Adjust the SHARPNESS control to obtain the clearest picture. 3. [. . . ] The POWER LAMP above the switch will illuminate. 14. POWER LED LAMP Power lamp indicates the power is on. 15. To prevent electrical shocks and fire hazards, do not use any other power source. 16, 17. IMPEDANCE SWITCH Set the switch to the HIGH position if the VIDEO OUTPUT jack is used. The last monitor should be set in the 75 position. Set the switch to the 75 position if the VIDEO OUTPUT is not used. 18 21. VIDEO INPUT & OUTPUT CONNECTORS These BNC connectors permit looping of a video signal in those installations where it is desirable to display the video signal on more than one monitor. A standard 1. 0 Vp-p video signal applied to the VIDEO INPUT will also appear at the VIDEO OUTPUT. Use coaxial cables with BNC type plugs for these connections. 22. S-VHS JACK If your input is S-VHS (VIDEO), connect directly to this jack. 23 26. AUDIO INPUT & OUTPUT CONNECTORS Connect an RCA cable between these jacks and the audio output jack of a camera or VCR. 7 POSSIBLE CONNECTIONS Read the installation/operation manual thoroughly before connecting equipment. Turn off the power source before connecting the monitor and external equipment. VIDEO 1 Connection (Select input VIDEO 1 button) Audio Audio signal cable Video Video signal cable Video camera VCR Audio Video Video Monitor VIDEO 2 Connection (Select input VIDEO 2 button) Audio Audio signal cable Video Video signal cable Video camera VCR Audio Video Video Monitor Y/C connection (Select input Y/C button) Audio Audio signal cable Video camera VCR Audio Y/C (S-VHS) S-VHS Signal cable Video Monitor 8 SAFETY INSTRUCTIONS IMPORTANT SAFEGUARDS All the safety and operating instructions should be read before the monitor is operated. Retain the instructions for future reference. HEED WARNINGS All warnings on the monitor and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating instructions should be followed. CLEANING Unplug the monitor from the wall outlet before cleaning. Use a cloth slightly dampened with mild household detergent only. WATER AND MOISTURE Do not use this monitor near water, for example, near a bathtub, wash bowl, kitchen sink, swimming pool, laundry tub, or in a wet basement. ACCESSORIES Do not place this monitor on an unstable cart, stand, tripod, bracket, or table. VENTILATION Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of this monitor and to protect it from overheating, the openings must not be blocked or covered. This monitor should never be placed near or over a radiator or heat register or in a built-in installation, such as a bookcase or rack, unless proper ventilation is provided. [. . . ] Refer all servicing to qualified service personnel. 9 SPECIFICATIONS Picture Tube Power Source Power Consumption System Sound output Resolution Speaker Terminals Dimensions(W H D) Weight Operating Temperature 21-inch diagonal, 90 deflection angle 100-240V AC, 50/60 Hz 67 Watts PAL / NTSC 1. 0 W Center resolution : 450 TV lines or more 3 W , 70 mm X 40 mm Video input level/impedance: 1. 0 Vpp/75 Video output level/impedance: 1. 0 Vpp/75 S-VHS INPUT Audio input level/impedance: 0. 3 Vrms/25K Audio output level/impedance: 0. 3 Vrms/4. 7K 18. 7 in 16. 9 in 18. 4 in (476 430 468 mm) Approx. 57. 3 lb (26Kg) 0-40 (32-106 F) Design and specifications are subject to change without notice. Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. 10 11 Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. [. . . ]