User manual HITACHI CP-X400

[. . . ] Projector CP-X200/CP-X300/CP-X400 User's Manual (detailed) Operating Guide Thank you for purchasing this projector. WARNING Before using this product, please read all manuals for this product. Be sure to read "Safety Guide" first. After reading them, store them in a safe place for future reference. About this manual Various symbols are used in this manual. [. . . ] A SCART cable is required for a SCART RGB input to the projector. For your reference, see the TECHNICAL part. COMPONENT (continued on next page) 3 INPUT Menu INPUT Menu (continued) Item Description The video format for S-VIDEO port and VIDEO port can be set. (1) Use the / buttons to select the input port. (2) Using the / buttons switches the mode for video format. AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4. 43 · This item is performed only for a video signal from VIDEO port or S-VIDEO port. · The AUTO mode automatically selects the optimum mode. · The AUTO operation may not work well for some signals. an irregular picture, lack of color), please select the mode according to the input signal. Using the / buttons turns the frame lock function on/off. TURN ON ó TURN OFF · This item can be performed only on a computer signal with a vertical frequency of 50 to 60 Hz. · When the TURN ON is selected, a moving pictures are displayed more smoothly. · This function may cause a certain degradation of the picture. The computer input signal type for COMPUTER IN1 and IN2 ports can be set. (1) Use the / buttons to select the input port to be set. COMPUTER (IN)1 ó COMPUTER (IN)2 (2) Use the / buttons to select the computer input signal type. SYNC ON G ON ó SYNC ON G OFF Selecting SYNC ON G ON allows reception of sync on Green signal. · When SYNC ON G ON is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal. VIDEO FORMAT FRAME LOCK COMPUTER IN (continued on next page) 3 INPUT Menu INPUT Menu (continued) Item Description The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector. (1) In INPUT menu select RESOLUTION using the / buttons and press the button. (2) In the RESOLUTION menu, select the resolution you wish to display using the / buttons. Selecting AUTO will set a resolution appropriate to the input signal. (3) STANDARD Pressing the or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size and automatically select an aspect ratio. [. . . ] After cleaning or changing the air filter, please be sure to reset the filter timer. After the remedy, reset the power to ON. Lighting In Green Alternative blinking in Red There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (5°C to 35°C). After the treatment, reset the power to ON. NOTE · When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. [. . . ]