User manual HITACHI CP-X705

[. . . ] Projector CP-X705/CP-X615 User's Manual (detailed) Network Guide Thank you for purchasing this projector. This projector has the network function that brings you the following main features. ü Web control The projector can be controlled and monitored by a web browser software on your PC, which can help you to setup and maintain the projector. ü e-SHOT (Still Image Transfer) Display The projector can display still images that are transferred via the network. [. . . ] Configures the date and time daylight savings time begins. Configures the month daylight savings time begins (1~12). Configures the week of the month daylight savings time begins (First, 2, 3, 4, Last). Configures the day of the week daylight savings time begins (Sun, Mon, Tue, Wed, Thu, Fri, Sat). Configures the hour daylight savings time begins (0 ~ 23). Configures the minute daylight savings time begins (0 ~ 59). Configures the date and time daylight savings time ends. Configures the month daylight savings time ends (1 ~ 12). Configures the week of the month daylight savings time ends (First, 2, 3, 4, Last). Configures the day of the week daylight savings time ends (Sun, Mon, Tue, Wed, Thu, Fri, Sat). Configures the hour daylight savings time ends (0 ~ 23). Configures the minute daylight savings time ends (0 ~ 59). 3 3. Management with Web browser software 3. 1 Configuring and controlling the projector via a web browser (continued) Item Time difference SNTP SNTP Server IP Address Cycle Description Configures the time difference. Set the same time difference as the one set on your PC. Click the [ON] check box to retrieve Date and Time information from the SNTP server and set the following items. Configures the SNTP server address in IP format. · The address allows not only IP address but also domain name if the valid DNS server is setup in the Network Settings. The maximum length of host or domain name is up to 55 characters. Configures the interval at which to retrieve Date and Time information from the SNTP server (hours:minutes). Click [Apply] button to save the settings. NOTE · The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu. [. . . ] You can restart the network connection by clicking [Network Restart] on the main menu. 4 3. Management with Web browser software 3. 6 Command Control via the Network (continued) Command Format Command formats differ among the different communication ports. TCP #23 You can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. [. . . ]