User manual HITACHI CX45E

[. . . ] IMPORTANT : Before plugging in the set, first insert the memory backup batteries. The remote control may not be effective in strong day light. Do not use new and old batteries or different kinds of batteries together. During radio listening (AM), if you operate the remote control extremely close to the sound system, some noise may be produced. [. . . ] Do not open the CD door while a disc is playing as this will damage the disc and the CD player. Pressing SLEEP [16] sets the unit to Standby mode at desire timer setting. TIMER-PLAY/TIMER-RECORDING The programmable timer turns on and off your desired sound source at your desired time. It can also start recording from a radio broadcast at your desired time. Adjust the hour setting by pressing 4/1 button [20] or ¡/¢ button [19] until it reaches the desired hour. After 10 seconds, the display will stop blinking. The BASS BOOST feature provides extra Bass Response, especially at lower volume levels. Push the BASS BOOST button [12] to "ON" _ to obtain rich Bass sound as desired. NOTE: If you are playing music with heavy Bass sound at loud volume levels, you may experience distortion if the BASS BOOST feature is "ON" _. Reduce its length if the FM-signal is too strong (very close to a transmitter). For AM, the set is provided with a built-in aerial, so the telescopic aerial is not needed. Direct the aerial by turning the whole set. sTEREO/MONO (FM only) · When an FM stereo signal is too weak or noisy for stereo listening, set the switch [33] to the MONO position to reduce the noise. If beat noise is audible while recording from an AM radio programme, flip switch [33] over from [A] to [B] or from [B] to [A] to reduce the noise. TAPE RECORDER SECTION Use only NORMAL tapes in the cassette deck of this sound system. The characteristics of the cassette deck mechanisms do not match other types of tape. STOP/EJECT BUTTON (7 ) When this button is pressed with the tape running, the tape stops. A programme may by heard at any desired volume, and the setting of the BASS BOOST Button [12] does not affect the volume because of the "Variable Monitor" device. CD PLAYER SECTION 4/1 AND ¡/¢ BUTTONS Skip playback By pressing the ¡/¢ [19] or 4/1 [20] buttons, you can skip to a next or previous title, or you can select a track before starting playback. During PLAY ­ You can skip to the next track by pressing the ¡/¢ button once. If you want to skip more than one track, press the ¡/¢ button more than once until the display shows the desired track number. ­ If you want to repeat the running title from the beginning, press the 4/1 button once. [. . . ] Repeat step 2 - 4 to program other channels. Now you can select channels using the number buttons on the remote control. Note: to select channel 15 for example, press +10 followed by 5. You can store at most 20 tracks in memory in any sequence. [. . . ]