User manual HITACHI D13VF

[. . . ] IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!This manual contains important information about product safety. Please read and understand this manual BEFORE operating the power tool. Please keep this manual available for other users and owners before they use the power tool. [. . . ] NEVER wear gloves made of stuff liable to roll up such as cotton, wool, cloth or string, etc. NEVER place your hands, fingers or other body parts near the tool's moving parts. nEVER operate without all guards in place. NEVER operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the tool. Don't force small tool or attachment to do the job of a heavy-duty tool. Don't use tool for purpose not intended --for example-- don't use circular saw for cutting tree limbs or logs. NEVER use a power tool for applications other than those specified. NEVER use a power tool for applications other than those specified in the Instruction Manual. NEVER allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel. Do not use power tools if the plastic housing or handle is cracked. cracks in the tool's housing or handle can lead to electric shock. Such tools should not be used until repaired. Blades, cutting implements and accessories which have been mounted to the tool should be secure and tight. The tool's motor air vent must be kept clean so that air can freely flow at all times. Operate the power tool at voltages specified on its nameplate. If using the power tool at a higher voltage than the rated voltage, it will result in abnormally fast motor revolution and may damage the unit and the motor may burn out. NEVER use a tool which is defective or operating abnormally. If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center. Don't leave tool until it comes to a complete stop. Should a power tool be dropped or struck against hard materials inadvertently, it may be deformed, cracked, or damaged. solvents such as gasoline , thinner benzine , carbon tetrachloride , and alcohol may damage and crack plastic parts. [. . . ] When switching off, the stopper can be disconnected by pulling the trigger again. CAUTION: As there is some reaction when the brake functions, sure to hold the drill securely. When drilling, start the drill slowly, and gradually increasing speed as you drill. Always apply pressure in a straight line with the bit. [. . . ]