User manual HITACHI DV-PF7E(F)

[. . . ] DVD/VCR Combo (DVD PLAYER with VIDEO CASSETTE RECORDER) INSTRUCTION MANUAL PAL MODEL SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation. DV-PF7E MP3 / JPEG PLAYBACK DVD / DVD-R / VIDEO CD / CD / CD-R / CD-RW COMPATIBLE REC TIMER AV3 VIDEO IN L (mono) AUDIO IN R VCR PROGRAM OUTPUT DVD DVD/VCR Combo DV-PF7E Instruction manual To obtain the best performance and ensure years of troublefree use, please read this instruction manual completely. English WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. PRECAUTIONS A NOTE ABOUT RECYCLING This product's packaging materials are recyclable and can be reused. [. . . ] · To temporarily stop recording or to resume it, press F. After the DVD/VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. NOTE: · When you wish to watch another programme while recording, select desired channel on your TV. OTR (One Touch Recording) VCR This feature allows you to set the recording length simply by pressing REC/OTR (I). Change the recording length by pressing REC/OTR (I) repeatedly. ­ 19 ­ EN English RECORDING FUNCTION For weekly recording: To record a TV programme at the same time on the same channel every week. While the month digit is flashing, press K or L repeatedly to select "WMO" (example: every monday). 5 For once-only recording only : Press K or L repeatedly until your desired day appears. 6 Press K or L repeatedly until the relevant start hour appears. 7 Press K or L repeatedly until the relevant end hour appears. 8 Press K or L repeatedly until the relevant channel number appears. 9 Press K or L repeatedly until your the desired tape speed appears. 10 Press K or L repeatedly to set VPS/PDC "ON" or "OFF". · The Video Programme System (VPS) / The Programme Delivery Control (PDC) is a very convenient system which assures that the TV programmes you have programmed for timer recording will be recorded exactly from beginning to end (refer to page 21). To set another timer programme, repeat steps 3 to 11 . · As REC light comes on, the DVD/VCR becomes STANDBY status, and switches to DVD mode automatically. · When all timer recordings are finished, REC light will flash. To use the DVD/VCR again as usual, press TIMER to disable the flashing REC light, then press DVD or VCR to choose DVD or VCR mode, then continue with the other features as described in this manual. TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAMME 1 Press TIMER. · If the VCR's power is off, press y/I instead of TIMER, then go on to the next step. · If the DVD output mode is selected, you have to switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the DVD/VCR. 2 Repeat steps 1 to 3 in the "Timer Recording" section. 3 Select the programme number you want to check by pressing K or L. · The details of the selected programme appears on the TV screen. [. . . ] DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. DO be careful with glass panels or doors on equipment. DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DON'T remove any fixed cover as this may expose dangerous voltages. [. . . ]