User manual HITACHI DVP745U

[. . . ] MODEL DVD PLAYER INSTRUCTION MANUAL INSTRUCCIONES EN ESPAÑOL INCLUIDAS. APPLIANCE TO RAIN OR MOISTURE. DV-P745U The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. IMPORTANT SAFEGUARDS 1) Read Instructions - All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions - The safety and operating instructions should be retained for future reference. [. . . ] 2 Within 30 seconds, enter a desired disc time using numerical buttons. · Playback will start at the specified time. · Press CLEAR to erase the incorrect input. NOTES: · When there is no need to enter a number, "0" appears automatically. For example, "0:0_:_ _" appears in the Time Search display if the total time of the disc is less than 10 minutes. zoom factor: x2, x4 or OFF. 3 Use Arrow ( L / K / B / s ) to move the zoomed picture across the screen. NOTES: · Zooming function does not work while disc menu is shown. · x4 zoom is not available on some discs. ­ 11 ­ EN PLAYING A DISC Repeat · REPEAT is available only during playback. Program (CD) CD DVD You may determine the order in which tracks will play. 1 In stop mode press CD-DA 8 3:30 9 2:30 10 1:30 ALL CLEAR REPEAT TITLE / CHAPTER To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) OFF (repeat off) TOTAL 0:08:00 MODE. 2 Press or to select a · The PROGRAM screen will appear. ENTER 2/2 8 3:30 track, then press ENTER. · Press CLEAR to erase the most recently entered program. 3 Press PLAY to play the programmed tracks. NOTES: · Repeat Title/Chapter is not available on some scenes. · The REPEAT setting will be cleared when moving to other titles or chapters. NOTES: · Press STOP once and then PLAY, playback will restart from the point where STOP was pressed. (Program continued) · Press STOP twice and then PLAY, playback will restart from the track in the usual way. (Program cleared) · Up to 99 programs can be entered. · To repeat the current track in the program, press REPEAT repeatedly until TRACK appears during playback. To repeat the entire program press REPEAT repeatedly until ALL appears during playback. · To erase all programs at once, select ALL CLEAR and press the ENTER button at step 2 . REPEAT TRACK CD To activate the repeat function, press REPEAT during playback. · The repeat mode changes as described below every time you press the button. TRACK (current track repeat) ALL (entire disc repeat) OFF (repeat off) Random Playback (CD) CD NOTES: · The repeat setting will be cleared by moving to another track. · Repeat playback does not function during A-B repeat playback. This shuffles the order of tracks instead of playback of in the original sequence. 1 In stop mode, press RANDOM CD-DA TOTAL 0:45:55 MP3 TRACK (current track repeat) GROUP (current folder repeat) ALL (entire disc repeat) OFF (repeat off) MODE twice. · RANDOM screen appears. 2 Press PLAY to start ranPLAY RANDOM PROGRAM --no indication-- dom playback. NOTE: · To repeat the current track in the random selection, press REPEAT repeatedly until TRACK appears during playback. [. . . ] Cabinet (exterior finish items), Battery packs, Accessories, Lens Cleanings, Head Cleanings, DVD Disc Damage, Video Tape Damage, or Software Modifications. Any defect, malfunction, or failure caused by or resulting from improper service, maintenance, repair, use of DVD Cleaning Disks, use of Video Cleaning Cassettes, software, or from abuse, neglect, accident or any other cause beyond the control of Hitachi C. Unpacking, set-up or installation, adjustment of customer operated controls, user instruction. Any product with Serial Numbers altered or removed E. [. . . ]