User manual HITACHI DVPF33U

[. . . ] H9450UD(EN). qx33 03. 1. 22 7:19 PM Page 1 DVD/VCR Combo (DVD PLAYER with VIDEO CASSETTE RECORDER) INSTRUCTION MANUAL MODEL DV-PF33U Recordable ReWritable OPEN/CLOSE POWER/STANDBY CHANNEL STOP PLAY DVD OUTPUT VCR TIMER REC REC/IRT REW F. FWD VIDEO IN LINE 2 L (mono) AUDIO IN R STOP/EJECT PLAY INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Instruction manual To obtain the best performance and ensure years of troublefree use, please read this instruction manual completely. Español English H9450UD(EN). qx33 03. 1. 22 7:19 PM Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. [. . . ] Then, press B. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME 07: 30 PM END TIME 08: 30 PM CHANNEL -REC SPEED - - If you want to use the DVD player during a VCR timer recording or while the TIMER light is on or flashes. ¡You can use the DVD player while the TIMER light is If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box. Leave the cable box or satellite box on for timer recording. on or flashes, or during a timer recording. ;Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don't have to set the TIMER off to use the DVD only. 7) Set the tape speed Press K or L repeatedly for the desired tape speed. Then, press B. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME 07: 30 PM END TIME 08: 30 PM 16 CHANNEL REC SPEED SP SP SLP TO STOP AN AUTOMATIC TIMER PROGRAM ALREADY STARTED Press STOP/EJECT on the DVD /VCR. TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM 1 Press TIMER. ¡If the VCR's power is off, press y/I instead of 5 To set another program, repeat step [4]. To exit, press CLEAR/C. RESET. 6 Press TIMER to set the timer. ¡The TIMER light on the VCR comes on. TIMER TIMER, then go on to the next step. ¡If the DVD output mode is selected, you have to RECORDING WILL NOT BE ACTIVATED UNLESS YOU PRESS TIMER. switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR. 2 Select main menu by pressing MENU. 3 Select "TIMER PROGRAMMING" by pressing K or L. Then, press B. HINTS FOR TIMER RECORDING VCR ¡If there is a power failure or the DVD/VCR is 4 Select the program number you want to check by pressing K or L. ¡The details of the selected program appears on the TV screen. ¡Go to the digit you want to change by pressing B or unplugged for more than 30 seconds, the clock setting and all timer settings will be lost. ¡If a tape ends during TIMER RECORDING, the DVD/VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off, the VCR will become STANDBY status). ¡If a tape is not in the DVD/VCR or does not have a safety tab, the TIMER light flashes and timer recording will not operate. Then, enter correct numbers by pressing o or p. ¡You may cancel the entire program by pressing s while the program number flashes. 5 Press CLEAR/C. RESET to exit. 6 Press TIMER to return to timer stand-by mode. ­ 21 ­ EN 1L25 English First, press K or L for the hour. Then, press B. ONE TIME PROGRAM PROGRAM NUMBER 4 DATE 05 /12 MON START TIME - - : - - - END TIME - - : - - - CHANNEL -REC SPEED - - ¡When all timer recordings are finished, the TIMER light will flash. To use the DVD/VCR again as usual, press TIMER to disable the flashing TIMER light, then press VCR/TV to select the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual. ¡When timer recordings are set, the TIMER light will come on. To use the DVD/VCR as usual until the time for the recording, press TIMER so that TIMER light disappears. Press VCR/TV to choose the VCR position. [. . . ] Si no lo está, presione el botón DVD en el control remoto para cambiar al modo DVD. Presione o o p repetidamente. Luego presione B. 3) Ajuste el año 2 Presione OPEN CLOSE para abrir la bandeja de carga del disco. 3 Ponga el disco elegido en la bandeja, con la etiqueta hacia arriba. Presione o o p repetidamente. El día de la semana aparecerá automáticamente. 4) Ajuste la hora 4 Presione PLAY. ¡La bandeja se cerrará automáticamente y la reproducción empezará luego desde el primer capítulo o pista del disco. [. . . ]