User manual HITACHI DZ-GX3100E

[. . . ] DZ-GX3300E/E(UK), DZ-GX3200E/E(UK), DZ-GX3100E/E(UK) DZ-BX37E/E(UK), DZ-BX35E/E(UK) DZ-GX3300E DZ-GX3200E DZ-GX3100E Instruction manual To obtain the best performance and ensure years of trouble-free use, please read this instruction manual completely. Bedienungsanleitung Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch, um durch richtige Bedienung jahrelangen und strungsfreien Betrieb zu gewhrleisten. Mode d'emploi Des performances optimales et un fonctionnement long terme seront assurs en appliquant les prsentes instructions aprs avoir entirement lu ce mode d'emploi. DVDCAM PC Software Support Centre URL http://dvdcam-pc. support. hitachi. ca/ English Important Information For Your Safety The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the camera/recorder is to be left unattended for a long period of time, turn it off. English WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. WARNING : TO PREVENT FIRE OR SHOCK HAZARD, USE THE RECOMMENDED ACCESSORIES ONLY. The DVD video camera/recorder and AC adapter/charger have the following caution marks. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Identifications of caution marks This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. [. . . ] 4 Choose "Scene", "Edit", "Delete", and then press the button. When using card, choose "Scene", "Delete", and then press the button. 5 The "Delete Scene" screen will appear: If you are sure you want to delete the selected scene, press the button. If you want to change the scene to be deleted, you can change it on this screen. Note: If you point the cursor at the scene to be deleted on DISC NAVIGATION screen, and then press the DELETE button on remote control, the screen in step 5 will appear. To delete an unwanted part of a scene on DVD-RAM/ DVD-RW (VR-mode) disc, divide the scene first, and then delete the unnecessary part (see page 80). If you delete all data on disc or card, initialising the disc or card will be recommended (see page 99). If the time of deleted scenes (stills) is quite short, the remaining free space of disc may not increase in the disc or card remaining indicator. The locked scenes on card cannot be deleted (see page 86). 6 The screen for verifying deletion will appear: Choose "YES", and then press the button. Choose "NO" to cancel deletion. After Yes or No setting, the "Delete Scene" screen will be restored. Repeat steps 5 and 6 to delete other scenes. 7 Press the button to quit. 79 English Scene Editing using submenu Press the MENU button before pressing the appear. Edit Select button in step 5 (see page 79): The submenu will English Go To Delete . . . . . . . . . . . . . . . . . . . . . . . To delete selected scenes Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . To restore the Disc Navigation screen Start Current. . . . . . . To select scenes from the start to the one that the cursor is on at the moment Current End. . . . . . . . To select scenes from the scene the cursor is on to the end All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . To select all scenes Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . To move the cursor to the first scene End. . . . . . . . . . . . . . . . . . . . . . . . . . . . To move the cursor to the last scene button will restore the screen in step 5. Pressing the Note: Although the submenu screen will appear for each setting, some menu items may not appear, depending on the setting. DIVIDING MOVIES (EDIT DIVIDE) You can divide a scene into two parts. To delete unnecessary portion of scene, first divide the scene, and then delete the unnecessary portion. 1 Press the DISC NAVIGATION button. 4 Choose, "Scene", "Edit", "Divide" and then press the button. Choose "NO" to cancel division. After division, the "Divide Scene" screen will be restored. Repeat steps 5 7 to divide another scene. 8 Press the button to quit. 5 The "Divide Scene" screen will appear: If you are sure you want to divide the selected scene, press the button: The selected scene will be played back. If you want to change the scene to be divided, you can change it on this screen. 6 When you reach the point where you want to divide the scene, press the SELECT button. Se l e c t D i v i s i o n Po i n t 002 0 : 00 : 18 S E L ENTER CANCEL 7 The screen for verifying press the button. The status bar of scene being played back can be switched division will appear: Choose "YES", and then off or on by pressing the DISPLAY button Note: If you press the MENU button before pressing the button in step 5, the submenu will appear. Search and frame advance are useful when designating division points. Combining scenes that were divided will restore the original scene (see page 81). If a special effect has been added to the original scene, the "IN" effect will be added to the first half of scene, and the "OUT" effect, to the latter half. The division point may drift before or after the designated point by approximately 0. 5 seconds. Since a scene with a skip set cannot be played back, no division point can be specified: Release the skip for the scene before dividing it. If the division point is at a still, a message will appear, but no division will be made. [. . . ] DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is illegal to watch television whilst driving. DON'T listen to headphones at high volume, as such use can permanently damage your hearing. DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. [. . . ]