User manual HITACHI DZ-MV780MA

[. . . ] Instruction Manual DZ-GX20MA DZ-MV780MA/DZ-MV750MA DVD-RAM DVD-RW DVD-R DZ-GX20MA DZ-MV780MA DZ-MV750MA HITACHI AMERICA, LTD. HOME ELECTRONICS DIVISION 900 Hitachi Way Chula Vista, CA 91914-3556 Service Hotline: 1-800-HITACHI (1-800-448-2244) HITACHI CANADA LTD. DIGITAL MEDIA DIVISION 2495 Meadowpine Blvd. Mississauga, Ontario L5N 6C3 CANADA Service Direct: 1-800-HITACHI (1-800-448-2244) Thank you for buying a Hitachi product. [. . . ] EIS cannot be used when recording photos on DZGX20MA or DZ-MV780MA. 2 Choose the "On" or "Off", and then press the A button. 3 Press the MENU button to end the setting. Checking EIS On or Off You can check EIS On or Off by the on-screen information display. 0:00:00 REM 3 0 MIN EIS FINE 8 : 0 0 AM 9/3 0 /2005 RECORDING SUBJECT USING LARGE MAGNIFICATION (DIGITAL ZOOM) See page 57 for setting on digital zoom. REDUCING WIND NOISE DURING RECORDING (MIC. FILTER) When recording sound from the microphone built into this DVD video camera/recorder, you can reduce wind noise in recording. If "MIC. Filter: ON" is specified, the low-frequency components in the sound picked up by microphone will be cut off during recording: This makes it easier to hear the target voice or sound during playback. 1 Press the MENU button, choose "MIC. Filter" on the "Camera Functions Setup" menu screen, and then press the A button. Camer a F u nc t i on s S e t u p P r o g r am AE Wh i t e Ba l . F i l t e r Of f ENTER RETURN 3 Press the MENU button to end the setting. 0:00:00 REM 3 0 MIN FINE 8 : 0 0 AM 9/3 0 /2005 RAM 2 Choose the desired option, and then press the A button. Note: You can also use the onMicrophone filter icon screen display to confirm that the MIC. Filter has been set. The MIC. Filter setting will be stored in memory even when the DVD video camera/recorder is turned off. The MIC. Filter function will work only during movie recording. The microphone filter function works only with the built-in microphone: It will not function when using an external microphone (p. 78). 93 English Setting Up Record Functions 1<>2 SWITCHING MOVIE QUALITY (VIDEO MODE) Choose the movie quality from "XTRA", "FINE", "STD". It is recommended that you record critical subjects in the "XTRA" or "FINE" mode. 29) 1 Press the MENU Re c o r d F u nc t i on s button, use the f/ V I DEO Mode e/d/c/A 16:9 I n p u t Sou r ce buttons to choose OSD Ou t p u t "VIDEO Mode" on the ENTER RETURN "Record Functions Setup" menu screen, and then press the A button. Setup XTRA F I NE STD RAM 2 Choose the desired quality mode, and then press the A button. 3 Press the MENU button to end the setting. 0:00:00 REM 3 0 MIN Note: The movie quality setting will be stored in memory even when the DVD video camera/recorder is turned off. The "VIDEO Mode" setting will not change even if the disc is replaced. When using DVD-RW (VF-mode)/DVD-R disc, you cannot switch the setting on movie quality or widescreen mode while recording on the disc: The DVD video camera/recorder will be automatically set to the movie quality or wide-screen mode first used with the disc for recording. The movie quality setting is effective only during movie recording: The setting will not be displayed during recording of stills. Movie quality FINE 8 : 0 0 AM 9/3 0 /2005 Block-like noise may appear in recorded image, or the outline of subject image is distorted under the recording conditions listed below: Pan the DVD video camera/recorder as slowly as possible. (Block noise is likely to appear in the "STD" mode): If there is a complicated pattern in background (as in following figure on left) If the DVD video camera/recorder is moved excessively or quickly If subject is moving rapidly even when the DVD video camera/recorder is not moving English (Image when block-like noise occurs) (Image without block-like noise) 94 1<>2 SETTING TO WIDE TV SCREEN MODE (16:9 MODE) When viewing recorded images later on a wide-screen TV (aspect ratio 16:9), specify wide-screen (16:9) mode "On": You can also record images with the aspect ratio changed (the aspect ratio with "Off" is 4:3). "16:9 On" specified (aspect ratio 16:9) "16:9 Off" specified (aspect ratio 4:3) 1 Press the MENU button, choose "16:9" on the 2 Choose "On", and then press the A button. "Record Setup Functions" menu screen, and 3 Press the MENU button to end the setting. then press the A button. Re c o r d F u nc t i on s S e t u p V I DEO Mode 16:9 I n p u t Sou r ce OSD Ou t p u t ENTER RETURN 0:00:00 REM 3 0 MIN On Of f FINE 8 : 0 0 AM 9/3 0 /2005 RAM 16:9 mode icon When viewing playback on an ordinary TV screen later, specify "16:9 Off": Recording with "16:9 On" specified will be played back on an ordinary TV with longer vertical direction of image. An image recorded with "16:9 On" specified will appear as follows: Display on LCD monitor screen Display in viewfinder 95 English Note: The 16:9 setting will be kept even after the DVD video camera/recorder is turned off. The 16:9 mode cannot be used with photo recording, external input, S-VIDEO external input (for DZ-GX20MA or DZ-MV780MA only), or "STD" recording using DVD-RW (VF-mode)/DVD-R disc. Once the DVD-RW (VF-mode)/DVD-R disc has been recorded in the wide-screen mode, you will not be able to switch to recording of external input or S-VIDEO external input (DZ-GX20MA or DZ-MV780MA only) using the same disc. When using DVD-RW (VF-mode)/DVD-R, switching between wide mode (16:9) and normal mode (4:3) will not be possible while using the same disc. Images recorded with "16:9 On" (aspect ratio 16:9) specified will be played back with the setting used during recording regardless of the 16:9 setting then being used. The characters of dates and titles will be longer in the vertical direction on a wide-screen TV and on the LCD monitor of this DVD video camera/recorder. When "16:9 On" is specified, black bands will appear across the top and bottom of LCD monitor screen (except on menu or Disc Navigation screen, or playback image recorded with "16:9 Off" is specified). The 16:9 setting is not compatible with ID-1/ID-2*. [. . . ] Toutes les dpenses encourues pour le transport ou la livraison nos centres de service autoriss Hitachi sont aux frais de l'acheteur. Le produit doit tre emball adquatement pour viter les bris, tout en s'assurant d'y inclure une brve description du problme ainsi qu'une PREUVE validant la garantie. Seuls les produits encore couverts par la garantie seront retourns sans frais au consommateur. CETTE GARANTIE NE S'APPLIQUE PAS DANS LES CAS SUIVANTS: 8 Produits utiliss pour la location. 1 Produits reus pour rparation sans preuve validant la garantie. 7 Produits utiliss des fins commerciales ou institutionnelles. 9 Installation originale (rglage initial), rglage externe et tout entretien rgulier tel que le nettoyage des ttes vido et de l'objectif ou toute modification ou tout dommage au logiciel. 2 Dommages rsultant de ngligence, mauvais usage, rparation sans autorisation, entreposage inadquat et de toute rparation effectue par des centres de service non autoriss par Hitachi. 3 Dommages ou pertes chappant tout contrle de la part de Hitachi tel que: feu, inondation, foudre, etc. [. . . ]