User manual HITACHI DZMV230A

[. . . ] Instruction Manual DZMV230A DZMV200A HITACHI AMERICA, LTD. HOME ELECTRONICS DIVISION 1855 Dornoch Court San Diego, CA 92154-7225 Tel. 1-800-HITACHI (1-800-448-2244) HITACHI CANADA LTD. DIGITAL MEDIA DIVISION 6740 Campobello Road Mississauga, Ontario L5N 2L8 CANADA Tel. [. . . ] Note: When using the self-timer function, the recording indicator will blink when the REC button is pressed regardless of whether Record LED is On or Off. 1 Press the MENU button. The menu screen will appear. 2 Use the joystick to choose "Record LED" on the "Initial Setup" menu screen. The options will appear on the right of "Record LED": The mark will be attached to the currently selected option. Changing Display Language You can change the language used to display the menu and information. The following shows that English is changed to French. 1 Press the MENU button. The menu screen will appear. to 2 Use the joystick on choose "Language" English the "Initial Setup" menu screen, and then press the button. to 3 Use the joystickand choose "Français", then press the center of the joystick: The display language will be changed to French. 4 Press the MENU button. The menu screen will disappear. The language setting will not change even if the DVD video camera/recorder is turned off. The options will appear on the right of "Language": The mark will be attached to "English". 64 Initializing All Settings to Defaults You can restore all camera menu settings to defaults (initial settings at the factory). (The date and time will not be reset. ) 1 Press the MENU button. The menu screen will appear. to 2 Use the joystick the choose "Reset" on "Initial Setup" menu screen, and then press button. the sure that you wish to reset, use 3 If you arechoose "YES", and then press the the joystick to button. All the setting items have now been reset to defaults. 4 Press the MENU button. The menu screen will disappear. Note: To cancel resetting midway, choose "NO" on the screen for verification in step 2 or press the button. The "Reset" verification screen will appear. English 65 Disc Navigation This section explains about how to edit recorded images using the Disc Navigation function. Before Using Disc Navigation Disc Navigation is a tool for editing scenes recorded on this DVD video camera/recorder. Here is an explanation on "scene" and "program", so that you will be able to make most use of Disc Navigation function. Structure of Data Recorded On This DVD Video Camera/Recorder Video recorded using this DVD video camera/recorder will be stored on disc in units of scene, in the order of recording. ·Movie: ·Still: One scene refers to images recorded between each press of the REC button until recording is temporarily stopped by pressing REC again. One scene refers to a still recorded by pressing REC button. The recorded scenes are collected as "programs" on each recording date. All programs Program No. 1 Recorded on May 3, 2002 9:00AM 11:30AM 2:00PM 4:00PM Program No. 10 Recorded on May 27, 2002 10:30AM 2:45PM 4:30PM 6:00PM Scene 4:30PM ··· 9:30PM Thumbnails * Times on each scene show when recordings were started. show the order in which recordings were made. Scenes of one program are lined up in the order of recording. Usually, when the button is pressed immediately after recording, the last scene of the last program on disc (scene ?10 in the above diagram) will be played back. To view previously recorded scenes (scenes 1-> in the above diagram), you can use the skip and search playback functions to find any desired scene. By using the Disc Navigation function, you can English easily find any desired scene, since you can specify a program or a scene. You can also fade the image recorded on the DVD video camera/recorder, and rearrange the order of scenes. Note: Thumbnails (first images of r ecorded scenes) are displayed from the top left of screen, and up to 12 thumbnails can appear on one screen. If there are 13 scenes or more recorded, tilt down the joystick and hold it to display 13th and any later scenes as thumbnails. Note: "Scene No. " is not inherent to that scene, but is a serial number of thumbnails being displayed. when all programs are displayed may be different from that for the same scene when a specific program is displayed. [. . . ] 17 Recording indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]