User manual HITACHI HDB72(ARGOS)

[. . . ] Digital Terrestrial TV Receiver Model HDB72 Instruction Manual To obtain the best performance and ensure years of trouble-free use, please read this instruction manual completely. CONTENTS 1. INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SOME DOS AND DON'TS ON THE SAFE USE OF EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 POWER CORD (MAINS LEAD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the "3" or "4" keys to highlight the FAVOURITE button at the base of the screen and then, in turn, highlight each channel that is required to be a favourite channel, using the "5" and "6" keys and press [SELECT]. A channel selected as a favourite appears in the main channel list with a favourites icon against the channel name. A channel can have its favourites status removed by repeating this procedure, to remove the icon. Leave the Channel List menu by pressing [MENU]. Once the required channels have been marked as favourite channels, the favourite mode can be activated to allow easy access to them. Press the [MENU] key to display the Main Menu, the "6" key twice to highlight Configuration, and press [SELECT] to display the Configuration screen. Press the "6" key four times to highlight the Favourite Mode line and using the "3" or "4" keys change the setting from Off to On. 12 When you leave the Configuration menu by pressing [MENU] the favourite mode is activated. Now, changing channel using the [P+] or [P-] keys will switch to only those channels marked as favourites in the channel list. You can still access all the channels in the channel list by keying in their channel list number or by selection from the Channel List screen. Alternatively you can switch off the favourite mode from the Favourite Mode line of the Configuration menu. NOTE: The favourite mode can only be activated if one or more channels in the channel list are marked as favourites. Similarly, if the favourite status is removed from all the channels in the Channel List, the favourite mode is turned off automatically. 5. 2. INSTALLATION The options located in Installation Menu are: 1. Add New Channels - Automatic Search - Manual Search 2. ADD NEW CHANNELS The receiver can search for channels automatically (searching all the broadcast frequencies for free-to-air channels) or manually (searching one specified broadcast frequency only for any channels to be found there). Press the [MENU] key to display the Main Menu and using the "5" or "6" keys, highlight the Installation line and press [SELECT] to display the Installation Menu. Highlight the Add New Channels line and press "4" to display the options. Select Automatic Search with the "5" or "6" keys and press [SELECT]. This starts the automatic tuning process and searches through all the available broadcast frequencies for free-to-air channels. Previous channels will be replaced on automatic search. 5. 2. 1. 1. AUTOMATIC SEARCH Automatic search is started by selecting YES in the auto-search pop up menu. All the multiplexes are searched and a channel table is created automatically. All channels found are stored in a sorted form with respect to their channel numbers. 5. 2. 1. 2. MANUAL SEARCH In manual search the number of the multiplex is entered manually and only that multiplex is searched for the channels. [. . . ] When there is no menu on the screen, pressing the TV/DVT button will manually toggle the STB between TV and VCR mode. In VCR mode the STB will display the output of the VCR. In TV mode the STB will display its own output. If the STB mode is not changed by pressing the TV/DTV button the SCART mode will be automatically detected. [. . . ]