User manual HITACHI HDC-1051E

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Align the focus frame on the screen with the subject you want on the left side of the image. Press the shutter button to record the left side of the image. Next compose the subject you want in the right side of the image, taking care to align the actual background with the semi-transparent image of the background of the first image, which is shown on the screen. When everything is aligned correctly, record the right side of the image. EN-49 Making sure that the background of the image is aligned correctly, record the image of the person who recorded the first image. ] and set the mode dial to one of the photography modes, except for [ ] PLAYBACK MODE Playing Back Still Images You can play back the still images on the LCD monitor. The images can be displayed in reverse or forward with the buttons. To view the next image, press . / Image Display Information You can switch the information display by pressing the button button switches when playing back images. Each press of the the information display state in the following order: Pressing the / buttons during image playback will rotate the image 90 degrees. The button rotates the image clockwise, whereas the button rotates the image counterclockwise. A press of the button opposite to the direction in which the image was rotated will return the image to the normal display. A[ ] icon is displayed with the video data. A [ ] icon is displayed with images which have an audio memo recorded. Press the SET button to play back voice memos. Press it again to stop voice memo playback. EN-50 Playing Back Video Clips You can play back recorded video clips on the LCD monitor. Select the desired video clip with the / buttons. A[ ] icon is displayed with the video data. Press the SET button to play back a video clip. Pressing the / buttons during playback initiates fast forward/fast reverse. Button Operations During Playback During a Pause (Forward play) Pressing the button will sequentially 1-frame feed invoke 2x fast-forward, 4x fast-forward, regular play. (Reverse play) Pressing the button will sequentially Reverse 1-frame invoke 2x fast-reverse, 4x fast- feed reverse, regular play. Sound On/Off Stop (The display returns to the 1st frame playback). Pause Cancel pause Regular forward play During a Stop The next image is displayed. button button The previous image is displayed. button button SET button Video clips cannot be displayed rotated or enlarged. EN-51 Playing Back Still Images/Video Clips on a TV You can also play back your images on a TV screen. Before connecting to any video devices, make sure to select NTSC/PAL to match the broadcast standard of the video equipment you are going to connect to the camera. [. . . ] Hold the SD memory card with its front side (printed arrow) facing the rear side of the camera, and then insert the card as far as it can go. Close the battery / SD memory card cover. Press the POWER button to turn on the camera. Viewing Images 1. The last image appears on the screen. Erasing Images 1. [. . . ]