User manual HITACHI HDC-1097E

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Refer to the section in this manual titled "Setting the Date and Time" for further details. EN-25 Erasing Images Erasing in Photography Mode (Quick Delete Function) The quick delete function enables you to delete the last captured image during capture. The last image and the quick delete menu appear on the screen. Press the button to confirm the deletion. To not delete, select [Cancel], and press the button. Erasing a single image / Erasing all images 1. Select the image you want to erase with the / buttons. Select [Single] or [All] with the / buttons, and press the button. [Single]: Erases the selected image or the last image. [All]: Erases all of the images except for the protected images. Select [Execute] with the / buttons, and press the button. To not erase, select [Cancel], and press the button. Deleting an image will not affect sequential image numbering. For example, if you delete image number 240, the next captured image will be numbered 241 even though 240 no longer exists. In other words, an image-number is retired when an image is deleted and will not be reused or reassigned to another subsequently captured image. EN-26 MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. Function 1. Press the button, and select the [Capture] / [Function] menu with the / buttons. Select the desired option item with the / buttons, and press the button to enter its respective menu. Select the desired setting with the / buttons, and press the button. To exit from the menu, press the button. Size This sets the size of the image that will be captured. *[ ] 3648 x 2736 *[ ] 2816 x 2112 *[ ] 2272 x 1704 *[ ] 1600 x 1200 *[ ] 640 x 480 Quality This sets the quality (compression) at which the image is captured. *[ ] Fine *[ ] Standard *[ ] Economy Sharpness This sets the sharpness of the image that will be captured. * Hard / Standard / Soft Saturation This sets the saturation of the image that will be captured. Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. *[ ] Fluoresc. 1 *[ ] Fluoresc. 2 *[ ] Daylight *[ ] Cloudy *[ ] Manual WB ISO This sets the sensitivity for capturing images. [. . . ] If the batteries or accumulators included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0. 0005% Mercury, or more than 0. 002% Cadmium or more than, 0. 004% Lead. Le marquage est en conformité avec la directive 2002/96/EC du DEEE (déchets d'équipements électriques et électroniques). Ce symbole indique l'obligation de ne pas déposer ce produit, y compris les batteries et accumulateurs vides ou déchargés, dans des décharges publiques, mais d'utiliser les systèmes spécifiques de retour et récupération disponibles. Si sur les piles ou accumulateurs inclus avec cet appareil, le symbole chimique Hg, Cd ou Pb est visible, cela signifie que la batterie a une teneur en métaux lourds de plus de 0. 0005% de mercure, ou plus de 0, 002% de cadmium, ou plus de 0, 004 % Plomb. [. . . ]