User manual HITACHI HDC-1205E

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To save your corrected image, select [Confirm] with the / buttons, and press the SET button. When this process ends, this replaces the original image with the corrected image. Dynamic Lighting Feature This feature compensates for the unfavorable lighting conditions by brightening underexposed areas and balancing overexposed areas. Select the image that you want to edit with the / buttons. Light. ] with the / buttons, and press the SET button. Select [High] or [Low] with the / buttons, and press the SET button. View the changes on the corrected image. To save your corrected image, select [Confirm] with the / buttons, and press the SET button. When this process ends, this replaces the original image with the corrected image. EN-21 Protecting Images Set the data to read-only to prevent images from being erased by mistake. Setup The last image appears on the screen. Select the image that you want to protect with the / Date/Time 2010. 01. 01 buttons. Select [Protect] with the / buttons, and press the Auto Off SET button. Select [Single] or [All] with the / buttons, and press SET button. Select [Set] with the / buttons, and press the SET button. Protection is applied to the image and the camera returns to the playback mode. The protect icon [ ] is displayed with protected images. When [All] has been selected, [ ] is displayed with all the images. Canceling the Protection To cancel protection for only one image, display the image on which you want to remove the image MENU SET protection. Select the image that you want to cancel protection with the / buttons. Select [Protect] with the / buttons, and press the SET button. Select [Single] or [All] with the / buttons, and press the SET button. Select [Cancel Protect] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the playback mode. Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of their protected status. EN-22 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. [. . . ] Press the button to display the previous 10th image. Press and hold the previous or next images automatically in sequential order. Release the / buttons if you wish to stop the automatic playback. QSG-5 Erasing Images Erasing a single image / Erasing all images 1. Select the image you want to erase with the / buttons. [. . . ]