User manual HITACHI HDC-561E

[. . . ] HDC-561E 5. 0 2. 36" S 3x Optical Zoom FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Select [Protect] with the / buttons, and press the SET button. Select [Single] or [All] with the / buttons, and press the SET button. Select [Set] with the / buttons, and press the SET button. Protect Protection is applied to the image and the camera returns to the previous menu mode. The protect icon [y] is displayed with protected images. When [All] has been selected, [y] is displayed with all the images. Canceling the Protection To cancel protection for only one image, display Protect the image on which you want to remove the image protection. Select [Protect] with the / buttons from the playback menu, and press the SET button. Select [Single] or [All] with the / buttons, and press the SET button. Select [Cancel Protect] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the previous menu mode. Protecting multiple images simultaneously 1. Select [Protect] with the / buttons from the playback menu, and press the SET button. Select [Select] with the / buttons, and press the SET button. The images are displayed in the thumbnail display. Select the images you want to protect with the / / / buttons, and press the x button. The protect icon [y] is displayed with protected images. Selecting a protected image and pressing the x button again will cancel the protection. This procedure is repeated to select multiple images. Protection and cancellation of the protection are executed and the camera returns to playback mode. Formatting an SD/SDHC memory card or internal memory overrides protection, and erases all images regardless of their protected status. EN-24 DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. Select the image that you want to set DPOF with the / buttons. Select [DPOF] with the / buttons, and press the SET button. [. . . ] Select [Single] with the / buttons, and press the SET button. [Single]: Erases the selected image or the last image. Select [Execute] with the / buttons, and press the SET button. To not erase, select [Cancel], and press the SET button. TRANSFERRING FILES TO YOUR COMPUTER System Requirement Windows Pentium 166 MHz or higher Windows 2000/XP/Vista 128MB RAM 128MB hard disk space CD-ROM drive Available USB port Macintosh PowerPC G3/G4/G5 OS 9. 0 or later 128MB RAM 128MB hard disk space CD-ROM drive Available USB port 1. [. . . ]