User manual HITACHI HDC-761E

[. . . ] HDC-761E 7 2. 36" FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] You cannot enter the Playback mode from the Setup mode. EN-25 Magnifying Images While reviewing your images, you may enlarge a selected portion of an image. This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification. The last recorded image appears on the LCD monitor screen. To view the previous image, press the four-way controller ( ). To view the next image, press the four-way controller ( ). Adjust the zoom ratio by using the / button. To enlarge the selected image, press the button. To return to the normal image, press the button. The magnification factor is displayed on the LCD monitor screen. To view different portions of the images, press the four-way controller ( adjust the display area. 1. 5X ) to The magnification factors range from 1. 5X to 4X (within 6 stages: 1. 5X, 2. 0X, 2. 5X, 3. 0X, 3. 5X and 4. 0X). Thumbnail Display This function allows you to view 9 thumbnail images on the LCD monitor screen simultaneously so you may search for a particular image. The last recorded image appears on the LCD monitor screen. Nine thumbnail images are displayed 4 5 6 simultaneously. For recorded movie clips, the movie mode icon will be displayed. 7 8 9 For protected images/movie clips, mark will be displayed. Use the four-way controller ( ) to move the cursor to select the image to be displayed at regular size. Press the or / button to display the selected image on full screen. EN-26 Slideshow Display The slideshow function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations. The last recorded image appears on the LCD monitor screen. Press the MENU button to access the Playback menu. Then use the four-way controller ( ) to select [Slide Show] and press the button. [. . . ] The actual capacity varies according to the shooting conditions and settings. Approximate Duration of Recording Time The table below indicates the approximate duration of recording time depending on the capacity of the internal memory and the SD memory card. Image size 320 x 240 SD Memory Card Internal Memory 32MB 64MB 128MB 256MB 512MB 1GB 2GB 4 GB 00:24 00:53 01:50 03:07 07:27 14:58 29:58 59:59 02:00:28 The values for the recording time may vary depending on the shooting conditions and settings. The frame rate is 30 fps (frames per second). EN-48 CONNECTING TO A PICTBRIDGE-COMPATIBLE PRINTER (OPTIONAL) Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed. Connecting the camera to the printer 1. [. . . ]