User manual HITACHI HDC-887E(ARGOS)

[. . . ] FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] To print the correct date on the image, set the date on the camera before you capture the image. Refer to section in this manual titled "Setting the Date and Time" for further details. EN-25 Erasing Images Erasing single image / Erasing all images 1. Select the image you want to erase with the / buttons. Select [Single] or [All] with the / buttons, and press the button. [Single]: Erases the selected image or the last image. [All]: Erases all of the images except for the protected images. [Select]: Erases a number of selected images. Select [Execute] with the / buttons, and press the button. To not erase, select [Cancel], and press the button. Erasing selected images This erases a number of selected images. Select [Select] with the / buttons, and press the button. The images are displayed in the thumbnail display. Select the image you want to erase with the / buttons, and press the button. One more press of the button will cancel the operation. Repeat this procedure and select all the images that you want to erase. Select [Execute] with the / buttons, and press the button. 6 Deleting an image will not affect sequential image numbering. For example, if you delete image number 240, the next captured image will be numbered 241 even though 240 no longer exists. In other words, an image-number is retired when an image is deleted and will not be reused or reassigned to another subsequently captured image. EN-26 MENU OPTIONS Capture Menu This menu is for the basic settings to be used when capturing still images. 1. Press the button, and select the [Capture] / [Function] menu with the / buttons. Select the desired option item with the / buttons, and press the button to enter its respective menu. Select the desired setting with the / buttons, and press the button. To exit from the menu, press the button. Scene Mode Select from 21 different scene modes in accordance with the shooting conditions. * Program AE / Smile Shot / Anti Shake / Panorama / Portrait Man / Portrait Lady / Landscape / Sports / Night Portrait / Night Scene / Candlelight / Fireworks / Text / Sunset / Sunrise / Splash Water / Flow Water / Snow / Beach / Pets / User Setting Size This sets the size of the image that will be captured. *[ *[ *[ *[ *[ ] 3264 x 2448 ] 2816 x 2112 ] 2272 x 1704 ] 1600 x 1200 ] 640 x 480 Quality This sets the quality (compression) at which the image is captured. *[ *[ *[ ] Fine ] Standard ] Economy Sharpness This sets the sharpness of the image that will be captured. * Hard / Normal / Soft EN-27 Saturation This sets the saturation of the image that will be captured. * High / Normal / Low White Balance This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye. [. . . ] Select [Execute] with the / buttons, and press the button. 6 EN-5 EN-6 VIDEO MODE Recording Video Clips This mode allows you to record video clips at a resolution of 320 x 240 / 640 x 480 pixels. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip. The recording time depends on the storage size and the subject of the image to be recorded. [. . . ]