User manual HITACHI HIT19WDVB

[. . . ] Instruction Manual 15. 4"/19" Widescreen LCD TV With Intergrated Digital Tuner HIT15WDVB HIT19WDVB GB Safety Warnings SOME DO'S AND DON'TS ON THE SAFE USE OF EQUIPMENT ------------------------------------------------------------------------------------------------------------------------------DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between the pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug before making or changing connections. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. [. . . ] Make sure an aerial is fitted then press OK button on the remote to start the Auto Programme Scan ( APS ). OK: Start Searching 2. In a short while you will see the TV programmes briefly as each channel is received and stored in the memory. When APS is completed, BBC1 digital TV will show, press the CH. buttons to view the other channels stored. To view analogue TV, press INPUT button and use the arrow buttons to select TV, then press the OK button. To power off press the STANDBY button, the green light will change to red. Selecting a Source Press the INPUT button to display the function required ( TV/AV ). Using the arrow buttons on the remote highlight the function required and press the OK button to select the function. buttons on the remote control and the CH. buttons on the LCD TV to change the TV channels. You can directly select the TV channel required by pressing 1, 2, or 3 etc on the remote button pad. +/- buttons on the remote control or the VOL. +/- buttons on the LCD TV to adjust the volume. To Mute the Sound Press MUTE and the sound cuts off. To turn mute off, press the MUTE button again, or simply press the VOL. Sleep Timer Press the SLEEP button continuously to select the sleep timer or turn the sleep timer from the OFF, 15, 30, 60 minutes; when the LCD TV has reached the set time, it will automatically turn off. If the TV has no input signal, it will automatically power down to standby after 15 minutes. OSD Menu Operation Video Adjust picture setting such as Picture Mode, Contrast, Brightness, Colour, Tint(NTSC), Sharpness, and Advanced. Adjust Colour Standard, Sound Standard, APS, Manual Search, and Channel Setup. Adjust preferences such as OSD, Blue Screen, Childlock, Sleep Timer, OSD Timer, and OSD Reset. Adjust screen such as Horizontal Size, Horizontal Position, Vertical Position, Phase, and Auto Sync. The DTV menu provide four sub-menus as following: Edit Favourite List, Configuration, Parental Control, EPG ( Electronic Programme Guide ), with which you can set the DTV as you wish. Audio Setup Preferences DTV ( Digital TV ) 2 Press the MENU button on the remote control. The main menu will appear on the screen. [. . . ] 3 Press the STANDBY button, and the red LED indicator will change to green. 4 To power off, press the STANDBY button again, and the green LED indicator will change to red. In the interests of safety and to avoid unnecessary energy consumption, never leave your TV in standby while unattended for long periods of time, eg. overnight, while on holiday or while out of the house. Full sca n cha nne ls insta lla tio n Cha nne ls fo und 0 Sca nning in pr o gr e ss Signa l qua lity EXIT Changing channels Press the NUMBER buttons to go directly to a channel e. g. [. . . ]