User manual HITACHI KH312

[. . . ] Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to qualified service personnel. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK), NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE Dangerous voltages, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure. ATTENTION The owner's manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the manual. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO DRIPPING OR SPLASHING. [. . . ] Turn this knob clockwise to switch the set on. 01 Volume Knob b. Turn this knob clockwise or anti-clockwise to increase or decrease the volume. After turning the volume anti-clockwise to the off position, the radio will be in STANDBY mode. FM mode: Touch to Auto seek mode or Manual tune mode, then turn this knob to change FM frequency with automatically or Manually DAB mode: Turning this knob to cycle through DAB stations Preset 1-5 touch pad DAB/FM mode: a. Touch and hold to save preset station 1-5; b. Touch to load preset station 1-5 DAB mode: Touch to Quick scan; Touch and hold to Full scan FM mode: Touch to switch between Manual tune mode and Auto seek mode DAB/FM/AUX mode: Touch to switch between DAB, FM and AUX mode DAB/FM mode: Touch to display station information FM mode: Touch and hold to switch the audio mode between Auto and Mono DAB mode: Touch and hold to Manual Tune 07 02 Tuning Knob 03 04 SCAN function touch pad 05 MODE function touch pad 06 INFO function touch pad Display screen Earphone socket AUX IN socket DC IN socket Battery compartment cover A window shows info of your radio 08 Designed for connecting to your earphone 09 Designed for connecting to AUX IN 10 Designed for connecting to power cord 1800mA) (DC 6. 5V Remove to insert batteries (C-size/LR14; 1. 5V x 4) 11 7 Getting Started Connect the supplied AC/DC adapter to the DC IN socket and then plug the other end to the mains socket. Turn the Volume Knob to power the unit on and extend the aerial found on the top of the DAB radio. Installing Batteries 1. Switch off the radio and unplug it from the mains socket. Remove the battery compartment cover at the bottom of the radio. Insert 4 new C-size batteries, referring to the polarity markings inside the battery compartment. Note: Before installing batteries, ensure that the radio is disconnected from the mains supply. If you are not going to use the radio for an extended period, please remove the batteries to avoid damage. Never mix old and new batteries. RADIO RIGHT SIDE VIEW DC IN socket DAB Mode Then your radio will go into DAB mode, or the last selected mode (ie: DAB or FM or AUX). If you want DAB mode, touch until DAB Mode appears. 8 How to search DAB Radio Stations Automatically 1. Touch the for Autotune Quick scan. For initial use in DAB mode, your radio will now scan for DAB stations in your area and store the DAB stations in memory. A slide bar is displayed on the LCD, indicating the progress of the scan. Touch and hold for Autotune Full scan. The radio will now perform a Full scan and store the DAB stations in memory. A slide bar is displayed on the LCD, indicating the progress of the scan. Once the scanning is completed, the DAB station name list will be displayed in alphanumeric order. The first station in the list will be selected. Turn the Tuning Knob to cycle through available stations, when your desired station appears, stop turning, your radio will tune to the selected station. Note: If no DAB signal is found in your area, it may be necessary for you to relocate your radio. Alternatively, visit http://www. ukdigitalradio. com/coverage to check that DAB coverage is available in your area. 9 Finding and Adding New DAB Stations Touch and hold display. until Autotune Full scan appears on the The radio will scan the DAB channels and add any new stations available to the station list. How to search DAB Radio Stations Manually 1. [. . . ] It may comprise information on music titles or details of the program and is provided by the broadcaster. Program Type: This is a description of the type of program provided by the FM station and is provided by the broadcaster. Signal Information: The indicator on the signal bar shows the minimum required signal level and the current signal level. Time and Date: This displays the time and date and is provided by the broadcaster. Frequency: This displays the transmission Frequency of current listening station. Audio type: This displays the current audio mode Auto or Mono. Touch again, return to the beginning. 15 FM Menu Controls 16 AUX IN Operation Mode AUX IN allows for quick and easy connection to an MP3 player or other external sound sources. 1. Touch until AUX mode is appeared. 2. Connect one end of the audio lead (not provided) to the headphone (or auxiliary out) socket of your source device, the other end connect to AUX IN socket on the right side of radio. 3. To gain optimal volume level, adjust the output volume level on both the source device and the radio. . 17 Specification General: Audio Output: Frequency Ranges: Antenna: Input Connectors: Output Connectors: LCD Display: Power Supply: Dimension: Design DAB & FM RDS Tabletop Radio 2W rms X 2 DAB Band III (174 - 240 MHz) FM (87. 5 - 108 MHz) Extension antenna DC power socket, Aux-in 3. 5mm stereo jack headphone socket (32 ohm) High resolution display 6. 5V dc 1800mA (AC/DC adaptor supplied) 151mm x 239mm x 87mm Visit Partmaster. co. uk today for the easiest way to buy electrical spares and accessories. [. . . ]