User manual HITACHI PJ-TX100

[. . . ] Projector PJ-TX100 User's Manual - Operating Guide Thank you for purchasing this projector. WARNING Before using, read the "User's Manual - Safety Guide" and these manuals to ensure correct usage through understanding. After reading, store them in a safe place for future reference. ENGLISH About this manual Various symbols are used in this manual. The meanings of these symbols are described below. [. . . ] At some signals, this function may not work well. memo When the V:INVERT or the H&V:INVERT is selected under the MIRROR item, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly. memo When the WIDE is selected under the ASPECT item of the IMAGE menu, this adjustment is ignored. memo When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible. Select the NORMAL or the WHISPER using the / buttons. : NORMAL WHISPER When the WHISPER is selected, acoustic noise and screen brightness are reduced. : Bright Dark Select a mirror status using the / buttons. : NORMAL H:INVERT V:INVERT H&V:INVERT WHISPER IRIS MIRROR 26 Multifunctional settings SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. Item ENGLISH FRANÇAIS MENU [RGB] PICTURE IMAGE INPUT SETUP SCREEN OPTION EASY MENU LANGUAGE MENU POSITION OSD BRIGHT START UP MyScreen MyScreen Lock MESSAGE :SELECT ENGLISH 5 ORIGINAL TURN OFF TURN ON Description Select a menu language using the / buttons. : DEUTSCH ESPAÑOL ITALIANO LANGUAGE NORSK NEDERLANDS SVENSKA PORTUGUÊS SUOMI POLSKI Adjust the menu position using the /// buttons. : Up MENU POSITION Left Right Down To quit the operation, press the "MENU" button or keep no operation for 50 seconds. OSD BRIGHT Select a brightness level of the OSD on the screen using the / buttons. : BRIGHT DARK Select a type of the START UP screen using the / buttons. : MyScreen ORIGINAL TURN OFF The START UP screen is the screen, which is displayed by detecting no signal or an unsuitable signal. The MyScreen is the screen you can register a desired screen, and the ORIGINAL is the existing standard screen. When the TURN OFF is selected, the BLUE is used. memo The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed. memo About the MyScreen, please refer to the item "MyScreen" in this table. Pressing the (or the ENTER) button starts the MyScreen registration. Please see the flow chart on the following page. Select the TURN ON or the TURN OFF using the / buttons. : TURN ON TURN OFF The TURN ON disables the operation of the item "MyScreen" of this SCREEN menu. START UP My Screen My Screen Lock 27 ENGLISH Multifunctional settings SCREEN Menu (continued) Item Description Select the TURN ON or the TURN OFF using the / buttons. [. . . ] (1) While the projector running, press the Handles MENU button to open the menu. (2) Choose the "OPTION" on the menu using the / button, then press the button or ENTER button. (3) Choose the "LAMP TIME" using the / button, then press and hold the RESET button for 3 seconds. (4) Choose the "RESET" using the button. Bottom side 3. [. . . ]