User manual HITACHI PJ-TX300 TECHNICAL SPECIFICATIONS
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI PJ-TX300. We hope that this HITACHI PJ-TX300 user guide will be useful to you.
Lastmanuals help download the user guide HITACHI PJ-TX300.
Manual abstract: user guide HITACHI PJ-TX300TECHNICAL SPECIFICATIONS
Detailed instructions for use are in the User's Guide.
[. . . ] RS-232C communication
9 5 4 8 3 7 2 6 1 1 6 2 7 3 8 4 9 5
CONTROL port of the projector
RS-232C cable(Cross)
- (1) RD (2) TD (3) - (4) GND (5) - (6) RTS (7) CTS (8) - (9) (1) CD (2) RD (3) TD (4) DTR (5) GND (6) DSR (7) RTS (8) DTS (9) RI
RS-232C port of a computer
Connecting the cable
(1) Turn off the projector and the computer power supplies. (2) Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable(Cross). [. . . ] (2) The projector changes the setting based on the above setting code. (3) The projector returns the response code `06H' to the computer. Using the projector default settings (Reset Command) (1) The computer sends the default setting code Header + Command data (`06H'+ `00H'+ type (2 bytes) + `00H'+`00H') to the projector. (2) The projector changes the specified setting to the default value. (3) The projector returns the response code `06H' to the computer. Increasing the projector setting value (Increment command) (1) The computer sends the increment code Header + Command data (`04H'+ `00H'+ type (2 bytes) +`00H'+ `00H') to the projector. (2) The projector in creases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. Decreasing the projector setting value (Decrement command) (1) The computer sends the decrement code Header + Command data (`05H'+ `00H'+ type (2 bytes) +`00H' + `00H') to the projector. (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code `06H' to the computer. When the projector cannot understand the received command When the projector cannot understand the received command, the error code `15H' is sent back to the computer. Sometimes the projector cannot properly receive the command. In such a case, the command is not executed and the error code `15H' is sent back to the computer. [. . . ] · Provide an interval of at least 40ms between the response code and any other code. · The projector outputs test data when the power supply is switched ON, and when the lamp is lit. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI PJ-TX300
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI PJ-TX300 will begin.
