User manual HITACHI VM-E520A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI VM-E520A. We hope that this HITACHI VM-E520A user guide will be useful to you.

Lastmanuals help download the user guide HITACHI VM-E520A.


Mode d'emploi HITACHI VM-E520A
Download

You may also download the following manuals related to this product:

   HITACHI VM-E520A (1372 ko)

Manual abstract: user guide HITACHI VM-E520A

Detailed instructions for use are in the User's Guide.

[. . . ] For Your Safety -1- Instruction Manual 8mm Video Camcorder VM-E520A / VM-E521A Hitachi Home Electronics (America), Inc. 3890 Steve Reynolds Blvd. , Norcross, GA 30093 Tel. 770-279-5600 HITACHI (HSC) CANADA INC 3300 Trans Canada Highway, Pointe Claire, Quebec, H9R 1B1, CANADA Tel. 514-697-9150 HITACHI SALES CORPORATION OF HAWAII, INC 3219 Koapaka Street, Honolulu, Hawaii 96819 Tel. [. . . ] A/V DUB Button (only on the remote control) Use this button to record new audio and video over existing audio and video. Basic Techniques The batteries are in place and charged, the date and time are set, and you are familiar with the controls. Hooking up the camcorder to your TV is not complicated but give yourself plenty of time to ensure connections are correct. Basic Techniques - 23 - This section guides you through basic recording and playback. Practice the basic techniques of recording and playback on something unimportant such as traffic or a short tour of your backyard. Once familiar with how the machine works you can move to the more sophisticated features with less stress. Let's get started! Making a Basic Recording The Hitachi VM-E520A/E521A uses PROGRAM AE auto exposure that automatically selects the optimum shutter speed (either 1/60, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000, or 1/4000 of a second). The iris adjusts automatically in response to shutter speed. Connect the camcorder to a power source ("Loading Batteries; Camcorder Batteries, " p 15, "Using Alternative Power Sources, " p. 17). Insert an 8mm cassette ("Inserting and Removing Cassettes, " p. 18). Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM. appears and the camcorder is now ready to record. 4. Use the diopter control to match the viewfinder's focus with your eyesight. When you are ready to record press the Start/Stop button. REC appears in the viewfinder and the camcorder records the picture you see in the viewfinder. Note: TAPE flashes in the viewfinder when the tab on the side of the cassette is completely visible. To stop recording press the Start/Stop button and REC disappears from the viewfinder replaced by places the camcorder in standby. This Note: TAPE END flashes in the viewfinder when about 3 minutes or less remain of the tape cassette. Note: If the camcorder is left in record/pause mode for more than 5 minutes, the camcorder turns off automatically. To restart it press the Start/Stop button and the camera returns to record/pause mode. Playing Back Your Recording Depending on the setup of your video equipment, you connect the camcorder in one of the 3 methods explained below. Connecting to a Television with a VCR Attached Basic Techniques - 24 - 1. Connect the provided AV stereo output cable to the AUDIO IN and VIDEO IN jacks of your VCR. Connect either the right or left audio plug into your VCR if it has only one AUDIO IN jack. Note: Some VCRs have an S-VIDEO IN jack. Connect the black S-VIDEO plug to the VCR instead of the yellow VIDEO plug. Note: If you use a generally available audio/video cable in place of the AV stereo output cable (provided) with the connection shown above, unplug the AV stereo output cable from the AV IN/OUT jack of the camcorder. [. . . ] Insert six batteries. The camcorder does not operate when alkaline batteries are inserted. TAPE DISPLAY Symptom TAPE appears in the viewfinder Check Point & Correction § Have you moved the camcorder or cassette from a cold place to a warm place so that its temperature changed abruptly?§ If the temperature has changed, remove the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour. § Remove the cassette and then try to reinsert: remove it several times. § If the indication is still shown in the viewfinder, use a cleaning tape to clean the heads and replace the cassette. Specifications General Specifications Power requirements Power consumption Dimensions Weight Operating temperature Storage temperature 6V DC 5. 4W (when recording) 3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm) 1. 89 lbs (approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI VM-E520A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI VM-E520A will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag