User manual HITACHI VM-H720A

[. . . ] For Your Safety -1- Instruction Manual 8mm Video Camcorder VM-H620A / VM-H720A Hitachi Home Electronics (America), Inc. 3890 Steve Reynolds Blvd. , Norcross, GA 30093 Tel. 770-279-5600 HITACHI (HSC) CANADA INC 3300 Trans Canada Highway, Pointe Claire, Quebec, H9R 1B1, CANADA Tel. 514-697-9150 HITACHI SALES CORPORATION OF HAWAII, INC 3219 Koapaka Street, Honolulu, Hawaii 96819 Tel. [. . . ] DISPLAY Button Use this button to select the viewfinder and TV display ("Using the Display Button, " p41). This button can be used instead of the DATE/TITLE button on the camcorder in the VIDEO mode. A/V DUB Button (only on the remote control) Use this button to record new audio and video over existing audio and video. Basic Techniques Basic Techniques - 29 - The batteries are in place and charged, the date and time are set, and you are familiar with the controls. Hooking up the camcorder to your TV is not complicated but give yourself plenty of time to ensure connections are correct. This section guides you through basic recording and playback. Practice the basic techniques of recording and playback on something unimportant such as traffic or a short tour of your backyard. Once familiar with how the machine works you can move to the more sophisticated features with less stress. Let's get started! Making a Basic Recording The Hitachi VM-H620A/H720A uses PROGRAM AE auto exposure that automatically selects the optimum shutter speed (either 1/60, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000, or 1/4000 of a second). The iris adjusts automatically in response to shutter speed. Connect the camcorder to a power source ("Loading Batteries; Camcorder Batteries, " p 15, "Using Alternative Power Sources, " p. 17). Insert an 8mm cassette ("Inserting and Removing Cassettes, " p. 18). Press the red button on the CAM/OFF/VIDEO switch as you slide it to CAM. appears and the camcorder is now ready to record. 4. Use the diopter control to match the viewfinder's focus with your eyesight. When you are ready to record press the Start/Stop button. REC appears in the viewfinder and the camcorder records the picture you see in the viewfinder. Note: TAPE flashes in the viewfinder when the tab on the side of the cassette is completely visible. To stop recording press the Start/Stop button and REC disappears from the viewfinder . replaced by Note: TAPE END flashes in the viewfinder when about 3 minutes or less remain of the tape cassette. Note: If the camcorder is left in record/pause mode for more than 5 minutes, the camcorder Basic Techniques - 30 - turns off automatically. To restart it press the Start/Stop button and the camera returns to record/pause mode. Playing Back Your Recording Depending on the setup of your video equipment, you connect the camcorder in one of the 3 methods explained below. Connecting to a Television with a VCR Attached 1. Connect the provided AV stereo output cable to the AUDIO IN and VIDEO IN jacks of your VCR. Connect either the right or left audio plug into your VCR if it has only one AUDIO IN jack. [. . . ] If the temperature has changed, remove the cassette and set the CAM/OFF/VIDEO switch to OFF, then wait for about one hour. Remove the cassette and then try to reinsert, remove it several times. IF the indication is still shown in the viewfinder, use a cleaning tape to clean the heads and replace the cassette. Specifications General Specifications Power requirements Power consumption Dimensions Weight hood, lens 6V DC VM-H620A: 5. 3W (when recording) VM-H720A: 5. 9W (when recording) 3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm) VM-H620A: 1. 91 lbs (approx. 870g) without battery pack, lens cap or cassette VM-H720A: 1. 89 lbs (approx. [. . . ]