User manual HITACHI VTFX750EUKN

[. . . ] Should the fuse need to be replaced, an ASTA or BSI approved BS1362 fuse must be used of the same rating. If the fuse cover is detachable never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of the plug. Fuse covers are available from your dealer. [. . . ] For further information on PDC see page 55. PDC 1 4 7 2 5 8 0 3 6 9 VIDEO Plus+ SP/LP 5 T I MER P ROG 19 : 30 CH0 2 20 : 00 PDC 17 / 05 / 00 WE DAY/MONTH/YEAR 7 =DLY/WKL 0000 = MENU SP Exit = Press the SP/LP button to select the recording speed (SP, LP, or no display). Note: If you select no display, the VCR will record at the speed displayed by the on-screen display. Check the recording speed after programming the timer. Press the SP/LP button to display the recording speed. If you are programming the timer for one time recording only, skip step 6 and go straight to step 7. 6 T I MER P ROG CH 0 2 19 : 30 20 : 00 17 / 05 / 00 WE DLY SP DAY/MONTH/YEAR 7 =DLY/WKL 0000 = MENU Exit To record at the same time every day of week Press the 7 button once. = "DLY" will appear next to the date on the TV screen. Note: When the 7 button is pressed twice, "DLY" will disappear and the screen will return to the programming mode for one-time recording. If you want to change the first recording date, press the 0000 button repeatedly until the cursor reaches the first digit of day. (If the cursor passes the first digit of day, press the 0000 button repeatedly again until the cursor reaches the first digit of day. ) T I MER P ROG 19 : 30 CH 0 2 20 : 00 17 / 05 / 00 WE DLY SP DAY/MONTH/YEAR 1 4 7 2 5 8 0 3 7 7 =DLY/WKL 0000 = MENU Exit = 6 9 0 ~ 9 0000 T I MER P ROG 19 : 30 CH 0 2 20 : 00 Then select the first recording date using the number buttons. 20 / 05 / 00 SA DLY DAY/MONTH/YEAR SP 7 =DLY/WKL 0000 = MENU Exit = 31 BASIC OPERATIONS (TIMER RECORDING) Controls TV Screen To record on a specified day at the same time each week Press the 7 button twice. "WKL" appears on the TV screen. Note: When the 7 button is pressed again, "WKL" will disappear and the screen will return to the programming mode for one-time recording. If you want to change the first recording date, press the 0000 button repeatedly until the cursor reaches the first digit of day. Note: When the 7 button is pressed again, "WKL" will disappear and the screen will return to the programming mode for one-time recording. 34 Controls VCR's Display T I MER P ROG 16 : 00 CH 0 4 18 : 00 SP Exit 8 OPERATE Now, programming has been completed to record one event. Press the MENU or VIDEO Plus+ button. 17 / 05 / 00 WE DAY/MONTH/YEAR 7 =DLY/WKL 0000 = MENU = 1 4 7 2 5 8 0 3 6 9 MENU The VCR shows the timer programme number for a few seconds. VCR's display 9 10 OPERATE If you want to programme other programmes, repeat steps 2 to 8. To activate the VCR's timer and make a recording at the preselected time, be sure to press the OPERATE button to turn the VCR off. Of course a cassette which has an intact safety tab must be inserted. To stop the timer recording press the OPERATE button and then the STOP button within 10 seconds. Must be lit. STOP 1 4 7 2 5 8 0 3 6 9 35 BASIC OPERATIONS VIDEO Plus+ (TIMER RECORDING) Recalling and clearing programmes from the VCR's memory Controls TV screen Turn the VCR and TV on. Be sure that the TV is set to the video programme number. 1 2 1 REV I EW 4 2 AUTO 3 CHANNEL VCR 5 MODE CLOCK Exit Press the MENU button. The OSD menu appears on the TV screen. MENU = 3 19 : 30 1 0 NO . 1 CH 0 2 20 : 00 SP Exit 17 / 05 / 00 WE 1 1 4 7 2 5 8 0 0 3 6 9 = NEXT MENU = = MENU Press the 1 button (REVIEW). The TV screen will display the information you entered for the lowest programme number. Press 1 again if you want to view the next programme information immediately. If no more programme information is stored, the menu screen will be restored. [. . . ] Plug the aerial cable (supplied) from the VCR RF OUT into the TV aerial input. Please refer to page 2. VCR TV screen Connect to main power supply after completely connecting all leads (as described on page 2: Connection). The VCR will be in standby mode at this stage and the VCR display will show "­ ­:­ ­". 2 3 Press OPERATE button. " " will appear in the VCR display. [. . . ]