User manual HITACHI VTFX765EUKN

[. . . ] The VT-FX940EUKN is one of the most sophisticated and simple-to-use video recorders (VCR) on the market. With this VCR you can record and play VHS-standard cassettes. So that you can identify your machine in the event of theft, enter the serial number (PROD. NO) here. The serial number is printed on the type plate fixed at the rear of the set. MODEL NO. Please take the time to read this operating manual before using your video recorder. VT-FX940EUKN PROD. NO: . [. . . ] This will, for example, appear in the display. I 0:30:21 2 To stop a certain place on the tape, press G . number for the video recorder. Note: During picture search, the picture quality may not be so good and there will be no sound. 12 Still picture/Slow motion 1 Press STILL R . A still picture will appear on the Tape Finder Automatic search for a tape position (index search) At the start of each recording, the video recorder will write an index code on the tape. 1 Press INDEX E and then I button to select the next screen. This will, for example, appear in the display. 0:00:21 2 Each time you press STILL R again, the picture will move on one step. 3 When you hold STILL R , the tape will be played in slow motion. 4 When you press I several times, you have a choice code mark or INDEX E and then H for the previous code mark. This will, for example, appear in the display for the next index code. of several playback speeds. Note: During slow motion there will be no sound. 0:30:02 2 When the video recorder finds the code mark, it will Searching for tape position without the picture (wind and rewind) 1 Stop the tape with h . 2 Press H (reverse) or I (forward). automatically switch to play. Automatic search for a blank space on the tape You can search for a space on the tape (at least 1 minute of blank tape) for a new recording, for example, after an existing recording on the tape. 1 Press INDEX E . Then press h . This will, for example, appear in the display. 0:30:02 3 To stop a certain place on the tape, press h . This will, for example, appear in the display. Easy View With this function you can switch to picture search during wind and rewind. 1 If you hold H (rewind) or I (wind) during wind or 0:00:00 2 When the video recorder find a blank space, it will automatically switch to 'pause'. Note: If no empty space has been found when the end of the tape is reached, the cassette will be ejected. rewind, you will switch to picture search. 2 When you release the button, the video recorder will automatically switch back to rewind or wind. Skipping commercials automatically With this function you can skip 120 sec. on the tape. 1 Press G while the tape is playing. 2 The video recorder will wind the tape 120 seconds and will then switch back to playback. Note: If the commercial is still on, you can press G again. The main menu will number for the video recorder. 2 Press MENU on the remote control. The main menu appear. 3 Select the line 'RECORD SPEED' with P- = or ;P+ appears. 3 Select the line 'SPECIAL SETTINGS' with P- = or ;P+ and confirm with OK . 4 Select the required recording speed with Q or P . , and confirm with OK . Note: 'LP': Long Play = half recording speed (double recording time). 'SP': Standard Play = normal recording speed. 5 Confirm with OK . 6 To end, press MENU . SPECIAL SETTINGS OSD CLOCK DISPLAY COUNTER SAT RECORDING REPEAT PLAY DIRECT RECORD è ON p OFF T. LEFT OFF OFF OFF ________________________________ EXITpMENU STOREpOK Note: The picture quality will be adversely affected when recording at half recording speed ('LP'). * For playback, the correct recording speed will automatically be selected. 4 Select the line 'SAT RECORDING' with P- = or ;P+ . 5 Select 'ON' with Q or P . Note: If you want to switch off the function, select 'OFF'. 6 Confirm with OK . 9 Use a scart cable to connect scart socket AV2 EXT2 on the video recorder to the corresponding scart socket on the satellite receiver. 0 Programme the satellite receiver with the required information (programme number of the TV channel, start time, end time). Note: The information on how to programme your satellite receiver can be found in the instruction manual of your satellite receiver. A Switch off the video recorder with STANDBY m . The video recorder is now ready to record. The beginning and end of the recording is controlled via scart socket AV2 EXT2 . 16 Note: If this function is switched on 'x' will appear on the video recorder display. 6 To end, press MENU . 7 Switch off with STANDBY m . 'Direct Record' When this function is switched on, the video recorder will automatically record the programme selected on the television by means of a scart cable. Note: You will find more information on how to switch 'Direct record' on in the next section 'Switching 'Direct Record' on or off'. 1 On the TV set, select the programme number you want make the recording from. 2 Press REC/OTR n and REC/OTR A at the same time with the video recorder switched off. Note: Don't select another programme number on your TV set, until the 'search symbol' on the video recorder display has disappeared. [. . . ] This guarantee does not affect your statutory rights. In all cases of difficulty consult your HITACHI dealer. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire SL8 5XF Tel: 01628-643000 3103 166 27601 0173/663 26 (Wwn N Nw nwN nwnWwnNnN w Nnw N) VT-FX940EUKN Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. [. . . ]