User manual HITACHI VTUX6430A

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HITACHI VTUX6430A. We hope that this HITACHI VTUX6430A user guide will be useful to you.

Lastmanuals help download the user guide HITACHI VTUX6430A.

Download

Manual abstract: user guide HITACHI VTUX6430A

Detailed instructions for use are in the User's Guide.

 [. . . ] VTUX6430A,  VTUX6440A HITACHI
VIDEO CASSETTE RECORDER VT-UX6430A - VT-UX6440A Owner's manual This instruction manual includes instructions on use of both VT-UX6430A and VTUX6440A. Using these quality features:
Common for VT-UX6430A and VT-UX6440A · The VCR Plus+* programming system allows you to program the VCR for timer recording by simply entering a PlusCode* number. * VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation.  [. . . ] During playback this function does not operate. OFF: The AUTO BLUE feature is switched off. 5 Press the GUIDE button to end the setting. 

CABLE BOX SETUP
The following setup allows the VCR channel to automatically switch to the cable box output channel during delayed recording. Note: This setup should be performed if you receive all channels through a cable box. 1 Turn on the TV and select the video channel (3 or 4). Or,  if you are hooked up with an audio/video cable,  set the TV to AUX or VIDEO. 

2 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 

3 Press the

cursor button to select the SETUP option and then press the ENTER button. 

4 Press the

cursor button to select the CHANNEL and then press the ENTER button. 

5 Press the

cursor button to select CATV2,  and then press the GUIDE button to end this setting. 

6 Press the GUIDE button. The main on-screen menu will appear on the TV screen. 

7 Press the

cursor button to select SETUP option,  and then press the ENTER. 

Note: Refer to the cable box owner's manual to identify the cable box output channel (usually 3 or 4). 8 Press the cursor button to select "VCR PLUS+ SETUP",  and then press the ENTER button. 

9 Press the ENTER button to answer "YES" to the question "IS CABLE BOX BEING USED?" cursor button and then the ENTER button. Or,  if you want to select "NO",  press the · If you select "YES",  you need not operate "VCR PLUS + SETUP" . During delayed recording,  the VCR channel will automatically switch to the cable box output channel. 

10 Using the VCR remote,  press the numbers. 

or

cursor button to enter the cable box output channel

11 Press the GUIDE button to end this setting. The cable box output channel has now been set. However,  the VCR does not control your cable box. Turn on the cable box and leave it tuned to the channel you want to record before the recording is scheduled to begin. Note: If you make a mistake when entering digits,  press the REW button to return the white dash "---". Then,  press the or cursor button to enter the correct number. 

PLAYBACK

To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4). Or,  if you are hooked up with an audio/video cable,  set the TV to AUX or VIDEO. 

2 Insert a recorded tape. When a cassette without its safety tab is inserted,  playback starts automatically. 

3 Press the PLAY button to start playing the tape. If you press the PLAY button and the cassette has not been inserted,  the warning screen will appear on the TV screen for several seconds. Insert a cassette. 

4 Press the STOP button to end playback. 

Note: This VCR can quasi playback the tape that is recorded by S- VHS type. When VCR playback by SQPB,  the inversion noise will appears on screen in STILL,  SLOW and F. ADV mode. 

Rewinding the tape
When the video cassette reaches the end of the tape,  the VCR will stop and automatically rewind the tape. · If you press the POWER button while the tape is rewinding,  the power will not shut off until the tape has been completely rewound.  [. . . ] Set the time and program the timer. 

(flashes for about 5 seconds) When programming the timer (by using VCR display) (flashes for about 5 seconds) When programming the timer (flashes for about 5 seconds) When you turn power off after · A cassette has not been inserted or a programming the timer,  or transfer the cassette without safety tab has been programming with the power off inserted. A cassette without safety tab will be ejected automatically. Insert a cassette with safety tab intact. . When you press the play,  record,  fast · A cassette has not been inserted.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE HITACHI VTUX6430A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HITACHI VTUX6430A will begin.