User manual HOLMES HAOF91

[. . . ] JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. jCS disclaims all other warranties , conditions or representations , express , implied , statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. [. . . ] Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas. Do not operate fan until fully assembled with all parts properly in place. This product is intended for household use ONLY and not for commercial or industrial applications. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window. WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device. Your fan comes fully assembled and ready for use. Follow these instructions to correctly and safely care for your power fan. please remember: · Always unplug the fan before cleaning or disassembling. ⷠBe sure to use a soft cloth moistened with a mild soap solution. ⷠDo not allow water to drip on or into the fan motor housing. ⷠDo not use any of the following as a cleaner: gasoline, thinner, benzene. ⷠUse a soft cloth moistened with a soap solution to carefully clean the front and rear grills. ⷠWe also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit. Your fan can be stored in the off-season in the original (or appropriately sized) box. It is important to keep it in a safe, dry location. Set the fan base on a dry, level surface. [. . . ] The model number can be located on the box or on the rating label which is located on the back of the fan head. Step 3: Secure the screws almost all the way into the wall using a screwdriver. Step 4: Line up the holes on the back of the unit with the screws to hang your fan. Make sure the screws are secured into the wall before carefully placing the fan on them. [. . . ]