User manual HOLMES HAWF2043

[. . . ] 8) DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. 9) DO NOT operate in the presence of explosive and/or flammable fumes. 10) Use appliance only for intended household use as described in this manual. [. . . ] Fan blade and Front Grill Cleaning: Step 1: Using a Philips head screwdriver, remove the screws that hold the front and rear grills together. Step 2: Clean the blades and grills with a soft cloth moistened with a mild soap solution. Step 3 : Securely fasten the front and rear grill back together. For a safe fit you will need a specially designed mounting bracket. This, and the needed hardware, can be provided to you free of charge. Installation instructions are included with the bracket. Please call the Consumer Service number located at the end of this manual. FAN STORAGE For all window fans, and fans that come already assembled. · It is important to keep it in a safe, dry location. · We recommend using the original (or appropriately sized) box. · Please remember to protect the fan from dust or moisture. INSTALLATION GUIDE For 24" to 27" : Use up to 3" of right side, pull out extender panel For 28" to 34" : Use one 3" extender panel on the left side. Adjust the pull out extender on the right side for a tight fit (from . 5" to 7"). For 35" to 37" : Use two 3" extender panels on the left side. Adjust the pull out extender on the right side for a tight fit (from . 5" to 7"). Larger than 37" : Additonal extender panels will required. OPERATING INSTRUCTIONS Your fan is equipped with the technologically advanced "1 Touch" Accutemp thermostat. This feature will automatically turn the fan "on" or "off" depending on the preset comfort level. The comfort level ranges between 60° and 80° Fahrenheit. · · · Plug the fan into a 120V AC electrical outlet. Set the individual fan motors on either INTAKE, EXHAUST or AIR EXCHANGE using the control lever(s). To start the unit and run continuously, push the button once for the High setting and press the button twice for the Low setting. NOTE: AIR FLOW DIRECTION CAN BE ALTERED WITHOUT TURNING THE FAN OFF. · To stop the unit, press and hold the button for two seconds or keep pressing the button until all the speed and temperature indicators are OFF. ONE TOUCH THERMOSTAT INSTRUCTIONS To take advantage of the One Touch Thermostat, continue to press the button until the desired temperature is reached. When ambient temperature drops below the set temperature, the fan will stop. When the outside temperature rises above the set point, the fan will turn on automatically. SERVICE INSTRUCTIONS 1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. [. . . ] Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) your name, full address with zip code and telephone number, b) a dated sales receipt or PROOF OF PURCHASE, c) your $7. 50 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you insure the package (as damage in shipment is not covered by your warranty). [. . . ]