User manual HOLMES HQH307TG

[. . . ] Extreme caution is necessary when any heater is used by, or near children or invalids, and whenever the heater is left operating and unattended. Always unplug the heater when not in use. When unplugging, be sure to pull by the plug and not the cord. DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater. [. . . ] DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY. The patented MaxFlowTM Fan system incorporates a top mounted fan and internal shroud to provide maximum heat dispersion. The MaxflowTM Fan system is actived by using the Mode Control Knob. It delivers a combination of instant, penetrating warmth in the immediate area, as well as forcing the heat out for entire room coverage. SETTING THE THERMOSTAT 1. You need to set thermostat on HI to start heater (See fig. Allow heater to operate and warm up the room. When the desired temperature/comfort level is reached, lower the thermostat setting until the fan/heater stops operating. The control will now automatically maintain the pre-set temperature level by turning the heater ON and OFF. Note: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. To prevent the unit from cycling, you need to raise the thermostat setting. OPERATING INSTRUCTIONS 1. For heater operation, please set the Thermostat all the way to HI. Turn the Mode Control to desired heat setting (LO for 750W or HI for 1500W). The Power Light will remain lit during operation. CLEANING/MAINTENANCE During Season Care: Always unplug the heater, before moving or cleaning. Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and heating elements. After cleaning, be sure to completely dry the unit with a cloth or towel. Holmes recommends that you store the unit in its original carton. PRE-OPERATING INSTRUCTIONS 1. Carefully remove your heater from the box. (please save the carton for off-season storage). Make sure the unit is in the OFF position before plugging the heater into the outlet. Avoid overloading your circuit by not using other high wattage appliances in the same outlet. At 1500 watts, this unit draws 12. 5 amps. NOTE: This unit is for FLOOR USE ONLY. TROUBLESHOOTING If your heater fails to operate: · Make sure the electrical outlet or circuit breaker is working. [. . . ] Carefully pack the item in its original carton or other suitable box to avoid damage in shipping. Before packing your unit for return; be sure to enclose: a) Your name, full address with zip code and telephone number, b) A dated sales receipt or PROOF OF PURCHASE, c) Your $10. 00 check for return packaging, and d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed. ) 3. Holmes recommends you insure the package (as damage in shipment is not covered by your warranty). [. . . ]