User manual HONEYWELL ES800

[. . . ] SPEED Press the button repeatedly to change the fan speed between The indicator light will show the selected speed: (Low) (Medium) (High) O W IE V E R P - - When AUTO is selected, the wind speed will gradually decrease and increase between the TurboBlastTM and QuietSleepTM fan speeds. (Auto) QUIETSLEEPTM / TURBOBLASTTM Press the button to select either QuietSleepTM or TurboBlastTM modes. TIMER Press the button until the desired time duration setting is selected. When the set time has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is unplugged from electrical socket). [. . . ] indicator level may be lower than the actual water capacity of the air cooler. WARNING: Do not ?ll water tank with dirty water or salt water. This can damage the unit and Honeycomb media. Water Filter Y L N Ice Compartment Filter Cup To clean the water ?lter, simply push the bottom of the ?lter cup upwards to release from the ?lter frame. Remove dust and hair from the ?lter sponge and rinse under clean water. When clean, replace the sponge and secure the ?lter cup back into the frame. AUTO-OFF SAFETY SYSTEM This unit is equipped with an Auto-Off Safety System. When the water tank is detached from the unit or if the tank is incorrectly positioned, the air cooler will turn off automatically. To restart the cooler, the tank must be attached to the unit correctly. *Applicable for models with water ?lter feature only. Com manuals search engine EN 4 USE & OPERATION (CONTINUED) LOW WATER ALARM* The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the minimum level, you will hear a beeping sound and the indicator light will ?ash continuously. the unit will automatically pause evaporative cooling. Re?ll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug from the power outlet. Fill the water tank with water above the minimum water level mark. To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low Water Alarm will sound again if the COOL function is activated while the water tank is still empty. *Applicable for models with low water alarm feature only. WATER LEVEL INDICATOR LIGHT O W IE V E R P CLEANING & DRAINING THE WATER TANK When the unit turns on, the water level indicator located at the front of the water tank will light up to produce an elegant glow. This can be convenient as a night light during the night. [. . . ] Rinse the ?lter with clean water and let it dry before re-installing to the rear grill. Slide down and remove the Honeycomb Frame. Replace or clean media with water and a damp cloth as needed. WARNING: DO NOT operate the Air Cooler when the Rear Grill is removed from the Air Cooler, or if there is a loose-?tting Rear Grill. [. . . ]