User manual HONEYWELL EVO TOUCH

[. . . ] The Home Screen shows HOLIDAY: · PressPress to Change to change the end date or time. To set holiday mode · PressHOLIDAY from the Home Screen. The following screen allows you to set the date and time at which holiday mode should end: To set economy mode · PressECONOMY from the Home Screen. The Home Screen shows ECONOMY ACTIVE: · PressCANCEL ECONOMY from the Home Screen to cancel Economy Mode. Main menu To display the Main Menu: · PressMENU from the home screen. This provides access to the following options: Operating Mode The Operating Mode menu allows you to specify whether the system heats or not: These are described in greater detail in the following sections. Zoning Menu The Zoning Menu allows you to view, edit, copy, or reset schedules, and configure zones. [. . . ] You are then prompted to specify the zone you want to copy to: If you press YES you are prompted for the start time (default 12:30), temperature (default 21°), and end time (default 13:30) for the lunchtime period. You are then prompted for: · Thetimethatthezoneagainbecomesoccupiedinthe evening (default 17:30). · Theeveningtemperature(default21°). · Thetimethatthezoneisnolongerusedintheevening (default 22:30). · Thenighttimetemperature(default15°). Finally, the following screen shows a summary of the schedule: · Pressthezoneyouwanttocopyto. The following screen summaries what you have selected: · PressDONE to proceed. After copying you are given the option of copying to a further zone. Reset Schedule The following menu allows you to select the zone to reset: · PressDONE to continue. The following options are then provided: · Pressthezoneyouwanttoreset. You will be prompted to confirm that you want to proceed. The zone will then be reset to the default schedule with four periods. Zoning Config Allows you to edit, add, and delete zones, and change the order in which zones are listed on the menus. See Zoning Configuration, page 6. · Selecttheappropriateoptiontodofurtherscheduling, or press DONE to finish. 5 Zoning Configuration The Zoning Configuration menu allows you to edit, add, and delete zones, and change the order in which zones are listed on the menus. The following warning is displayed: Zone Order Displays the following menu to allow you to specify the order of the zones: · Pressthebuttonfor5seconds, asinstructed. This provides access to the following options: · Pressthebuttonsintheorderyouwantthezonestobe arranged on the menus. As you press each button it will disappear from the screen. Alternatively, to choose the default order press DEFAULT. Add Zone Allows you to add a new zone to the system. NOTE: This option is not displayed if eight zones have already been defined. You are first prompted to give the zone a name. NOTE: The ZONE ORDER and DELETE ZONE options are only available if more than one zone has been created. The options are described in the following sections. [. . . ] After 30 seconds press DONE to return to the setting menu, or CLEAN to continue for another 30 seconds: It provides the following options: Time/Date Setting Allows you to set the time and date: Display Settings Allows you to alter the display brightness and contrast, and the screen timeouts: For more information see the Quick Start User Guide. · PressMORE to change the timeouts: Fault Logbook Displays a log of the most recent faults encountered by the system: Backlight time specifies how long the display backlight stays on after the touchscreen has been active. Language Selection Allows you to change the language of the user interface: Time out specifies how long the current menu remains on the screen before returning to the standby display. For the timeout setting the following options are available: The currently selected language is shown highlighted. · Pressthetimedurationyouwanttoselect. Clean Screen Freezes the screen for 30 seconds so you can clean it without accidentally selecting menu options: 8 Safety information Approvals Conforms to protection requirements of the following directives: EMC: 2004/108/EC LVD: 2006/95/EC R&TTE: 1995/5/EC WEEE directive 2002/96/EC Waste Electrical and Electronic Equipment directive · Attheendoftheproductlifedisposeofthepackagingand product in a corresponding recycling centre. · Donotdisposeoftheunitwiththeusualdomesticrefuse. · Disposeofthebatteriesaccordingtothelocalstatutory requirements and not with the usual domestic refuse. [. . . ]