User manual HONEYWELL EXCEL WEB

[. . . ] Excel Web EXCEL 5000 OPEN SYSTEM USER GUIDE ® U. S. Registered Trademark Copyright © 2009 Honeywell Inc. All Rights Reserved EN2B-0289GE51 R0709 EXCEL WEB USER GUIDE Software License Advisory This document supports software that is proprietary to Honeywell Inc. Before software delivery, the end user must execute a software license agreement that governs software use. [. . . ] Filter Template Allows quickly displaying certain datapoints of a plant. NOTE: If this option is selected, the Assign Parameters tab will not be available. From the Read Access Level and Write Access Level drop-down list boxes, select the user levels that should have read and write access of the fast access list. If you have selected the fast access list type ´Selected Points/Parameters`, continue with step 10. If you have selected the fast access list type ´Filter Template`, continue with step 33. Click on the Assign Datapoints tab. 139 EN2B-0289GE51 R0709 EXCEL WEB USER GUIDE 11. Under Point Filter, select the point types that should be used in the fast access list, as follows: a. Under Plant, select plant(s) of which datapoints you want to be displayed by clicking the BROWSE button and selecting the plants in the Select Plants dialog box. RESULT: Only the datapoints belonging to these plant(s) will be shown. b. Under Type, check/uncheck specific datapoint types to be included/excluded from the filter. Under Name, specific datapoint names can be filtered by entering a search text. By default all datapoints will be displayed as indicated by an asterisk. To display specific datapoint (names), enter the appropriate search text. Click the GO Button to apply the filter. RESULT: In the Assignable Points list, all datapoints matching the filter criteria will be displayed. In the Assigned Points list, already-assigned datapoints are displayed. To move points between lists, that is, to make them assigned or assignable, do one of the following: a. In the Assigned Points list or in the Assignable Points list, highlight the points to be moved. Multiselection by using the CTRL or the SHIFT key is possible. Click the SINGLE ARROW button with desired direction. Or, EN2B-0289GE51 R0709 140 USER GUIDE c. Click the DOUBLE ARROW button with desired direction. EXCEL WEB NOTE: Only those datapoints are displayed of which read access level is equal to or lower than the read access level of the user. [. . . ] If the binary output is used as alarm connector, the connected device gives a visual or acoustic alarm. · EBI indicates ´Controller Offline` Voltage drop · Restart of the controller. On the physical controller this is not visible. · EBI indicates ´Controller Offline`. [. . . ]