User manual HONEYWELL HCI 300

[. . . ] It then provides spoken information as to which Lifestyle is activated or asks which Lifestyle you would like to activate. The HCI 300 guides you through the individual steps via spoken commands. You must confirm each entry with the pound sign (#). Alarm output at a telephone An alarm could be triggered when a smoke detector activates a Lifestyle and a Lifestyle is assigned to the message text, for example. The message text is forwarded to the entered telephone numbers. [. . . ] Improving data transfer Remove/avoid interfering, shielding devices, e. g. : ­ wireless headphones ­ wireless telephone base stations (may not be located within 70 cm of the HCI 300) Move the HCI 300 and the Hometronic Manager closer together (max. distance: 30 m). 20 Operation Operation The HCI 300 is operated via the keypad of the telephone used to call the device. Follow the announcements of the HCI 300. First call Call the HCI 300 from an external telephone. The HCI 300 responds with the words: "Please enter your PIN". The alarm/message text must be suppressed here (see "Suppressing alarm/message text" on Page 24). Suppressing alarm/message text When using the HX 10 expansion module and active priority input "1", the alarm/message text is also triggered again after pressing the pound sign (#). The alarm/message text must be suppressed here: Call the HCI 300 from an external telephone. The HCI 300 responds with the words: "Please enter your PIN. " Enter the PIN* "1422010". Enter the number of the reported alarm. Alarm text Fire Alarm Burglar Alarm Water Alarm Alarm Trouble Report Enter "00". Press the pound sign (#) on the telephone to confirm the PIN. Number 1 2 3 4 5 24 Operation The following shows all the input for a water alarm: "1422010300". Once the cause of the alarm has been eliminated, the alarm must be reactivated at the HCM 200 (see "Linking Lifestyle to alarm/message text" on Page 33). 25 Changing settings at Hometronic Manager Changing settings at Hometronic Manager Switching to "Internet parameters" menu of Hometronic Manager In the "Internet parameters" submenu, you can individually adapt the settings for the selection of the HCI 300 from a telephone (number of rings before the HCI 300 responds and PIN). The values for the other parameters in this submenu are required for the Internet connection and established by the respective ISP*. For additional information, please contact Honeywell directly (see back cover of these instructions). ISP* Username ISP* Password 26 Meaning Number of rings before the HCI 300 responds Telephone PIN Port address of the Global Home Server (GHS) TCP/IP network address of GHS* Telephone number of the Internet service provider (ISP) User name for ISP* Password for ISP* Changing settings at Hometronic Manager The display of the Hometronic Manager shows, for example: Hometronic WE 29. 10. 1999 11:15 No Lifestyle active LIVING 20. 0 C MENU SET DATE/TIME ACTIVATE LIFESTYLE LIVING 20. 0 C LIFESTYLES TIME PROGRAMS DISPLAY SETTINGS LIFESTYLES TIME PROGRAMS DISPLAY SETTINGS INSTALLATION DE-INSTALLATION FUNCTION EXTENSION SENSOR FUNCTION Press the Input button. The cursor flashes on the bottom line. Turn the Input button to the right until "Menu" is selected. Press the Input button. The following text is displayed: Turn the Input button to the left until "Settings" is selected. Press the Input button. The following text is displayed: 27 Changing settings at Hometronic Manager Turn the Input button to the left until "Internet parameters" is selected. SENSOR FUNCTION SUMMER TIME PARAMETERS INTERNET PARAMETERS HIM Parameter Menu Please wait!of rings 4 Telephone PIN 1111 HIM Parameter Menu Current values: No. of rings 4 Telephone PIN 1111 Press the Input button. The following text is displayed: Wait until the display "Please wait! 127" changes to "Current values:". If "Default settings" or "No Parameters" appears in the display, interference has affected the wireless communication between the Hometronic Manager and the HCI 300 (see "Help with problems" on Page 37). 28 Changing settings at Hometronic Manager Changing number of rings Turn the Input button to the left until HIM Parameter Menu Current values: No. of rings 4 Telephone PIN 1111 Press the Input button and change the number of rings by turning the Input button. The number of rings for the HCI 300 must be higher than that of the connected devices (fax machine, answering machine, etc. ). Changing PIN The PIN "1111" set at the factory can be changed in order to prevent misuse. Turn the Input button to the left until HIM Parameter Menu Current values: No. of rings 4 Telephone PIN 1111 Press the Input button and change the first two digits of the PIN by turning the Input button. Press the Input button and change the last two digits of the PIN by turning the Input button. 29 Changing settings at Hometronic Manager Press the Input button. By selecting and confirming "Set basic system settings", all Internet parameters are reset to the predefined values. The current parameters are transferred to the HCI 300 via "Send all parameters". Changing to "Alarm Parameters" submenu The settings for calls of the HCI 300 to an external telephone are changed in the "Alarm Parameter Menu". [. . . ] Improve the transmission (see "Improving data transfer" on Page 20). Local telephone does not receive Check cabling of HCI 300 (see dial tone. "Checking wiring of telephone jack" on Page 9). Other device (fax machine, Check cabling of HCI 300 (see "Terminal telephone) does not assignment at Hometronic Voice & Web function properly. [. . . ]