User manual HONEYWELL MICRONIK 200

[. . . ] HONEYWELL Operator's Terminal MicroniK 200 USER GUIDE EN2B-0212GE51 R0102 OPERATOR'S TERMINAL EN2B-0212GE51 R0102 CONTENTS OPERATOR'S TERMINAL CONTENTS Software installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hardware installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Screen Layout and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 The Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Setting of a higher number will unnecessarily slow down the program. Leave menu. [Exit] 7 EN2B-0212GE51 R0102 OPERATOR'S TERMINAL MENU OVERVIEW [M200] Saving and Copying the Control and Configuration Parameters Saving M200 Parameters in a Data File The settings of a controller can be stored in the PC. All settings (including schedule) are stored every time into an individual file. Assign a dedicated file name (maximum 8 characters) for this. In addition, a Note with a more detailed description can be assigned (assign the Note before storing!). Procedure: · Select controller in the table "M200" with a mouse click. · Enter desired file name into the edit field. The extension ". M20" is appended automatically and need not be entered. An already-existent file name can be overwritten by clicking on the corresponding file in the list "file". · In the field "Note", insert comments about this file. · With a mouse click on [---->], all controller data are stored in the file. The files can be copied also to or from another computer. These are stored under . . M200\Data\xxx. M20 and have the extension . M20. Copying All Parameters from a Data File into a Controller Copying all parameters (including schedule) into an individual controller. · This is useful if a controller has been replaced and the previously stored settings have to be loaded into the new controller or, if there are several identical controlled systems, the data of an adjusted controller have to be loaded into the other controllers. Procedure: · Select file to be transferred with a mouse click in the table "file" · Select the controller into which the data should be transferred with a mouse click in the table "M200" EN2B-0212GE51 R0102 8 MENU OVERVIEW OPERATOR'S TERMINAL · With a mouse click on [<----] all parameters (including schedule) are transferred to the controller. Copying Schedules from a Data File into a Controller Copy weekly and yearly schedule into an individual controller. The controller parameters are not transferred here. Procedure: · Select file to be transferred with a mouse click in the table "file" · Select the controller into which the data should be transferred, in the table "M200" with a mouse click. · With a mouse click on [<---- Schedule] the schedule will be transferred to the controller. Copying Schedules from a Data File in all Controllers Copy weekly and yearly schedule into all controllers. The controller parameters are not transferred here. [. . . ] Click on [Delete single] deletes the controller from the list. Click on [Delete all] deletes all controller from the list. · These settings are stored in a file and are loaded into the list with a new start of the M200 program. · To transfer the settings into another computer, copy the file . . \M200\Data\Watch. dat into the other PC. Low and High Limit Monitoring [Display Min and Max] In the field "Min/Max Monitoring", the following setting options are available: In the case of falling below the minimum temperature and/or exceeding the maximum temperature the respective values are separately displayed in the list "Report". [. . . ]