Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual HONEYWELL RTH230B. We hope that this HONEYWELL RTH230B user guide will be useful to you.
Lastmanuals help download the user guide HONEYWELL RTH230B.
Detailed instructions for use are in the User's Guide.
[. . . ] In this case, this thermostat cannot be used. Identify and label each wire (with the corresponding letter on the wire terminal) and remove them from the terminals. If necessary, strip the end of each wire (maximum of 1/4 inch).
RTH230B
Note: The red jumper wire between the Rc and Rh terminals must be removed in 2- or 5-wire installations. [. . . ] After replacing the batteries, readjust the time and day (see section 5. 1). However, the temperature and program settings are saved and do not need to be re-entered. Warning: Before removing the batteries, place the system switch on the thermostat to Off. Otherwise, the heating/cooling unit might still be running even after the batteries are removed.
The fan is always on.
4. Configuration Menu
To access the configuration menu, press both simultaneously for 3 seconds. buttons To go to the next parameter (menu item), briefly press both buttons simultaneously. To modify a parameter, press one of the Repeat steps 2 and 3 if necessary. Press both buttons simultaneously for 3 seconds to exit the configuration menu.
DISPLAY DESCRIPTION Temperature display Time display Early Start 1 Heating cycles per hour 2 Cooling cycles per hour 2 DEFAULT °F 12 h Off 4 4 OPTIONS °C or °F 12 h or 24 h On or Off 2, 3, 4, 5 or 6 3 2, 3, 4, 5 or 6 4
3. 3 Displaying the Temperature
The actual temperature is normally displayed. To view the setpoint, press once on one of the buttons. The setpoint is displayed for 5 seconds along with the icon. Note: Pressing either of the change the setpoint. buttons more than once will
buttons.
3. 4 Setting the Temperature
Press one of the played. buttons until the desired temperature is dis-
3. 5 Thermostat Control Mode
3. 5. 1 Manual/Permanent Hold Mode
Maintains the temperature at a fixed setpoint. To place the thermostat in this mode, press [ Mode ]. The house icon will disappear.
3. 5. 2 Programmable Mode
Maintains the temperature according to the energy-saving schedule. To place the thermostat in this mode, press [ Mode ]. [. . . ] Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL RTH230B
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL RTH230B will begin.
