User manual HONEYWELL RTH7000

[. . . ] 5 Remove Old Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Follow Special Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Label Old Thermostat Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Mount New Wallplate to Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] After you select your setting, press the Next button to go to the next Installer Setup Number. Follow steps 5 and 6 to set Installer Setup Numbers 0130, 0140 and 0150 to complete setting the calendar. INSTALLER SETUP NUMBER Period Wake Leave FACTORY SETTING CHANGE THE FACTORY SETTING Clock Go Back Next More Done GOES BACK TO LAST INSTALLER SETUP ADVANCE TO NEXT INSTALLER SETUP PRESS TO EXIT INSTALLER SETUP Installer Setup Number 0120 0130 0140 0150 Installer Setup Name Date (Year Upper) Date (Year Lower) Date (Month) Date (Day) (Select Your Setting) Settings Select first two digits of current calendar year (20 for year 2005, etc). If you do not have a number 0180 on the left side of your display, go to the next page. If you have a number 0180 on the left side of your display, press the Up or Down arrow to select your setting for Installer Setup Number 0180. After you select your setting, press the Next button to go to the next Installer Setup Number. Period Wake Leave SETTING UP ARROW DOWN ARROW INSTALLER SETUP NUMBER Clock Go Back Next More Done GOES BACK TO LAST INSTALLER SETUP ADVANCE TO NEXT INSTALLER SETUP PRESS TO EXIT INSTALLER SETUP Installer Setup Number 0180 Installer Setup Name (Select Your Setting) Settings Fan Control 0 - Gas or Oil Heat -- Heating system controls fan in a call for heat. in Heating 1 - Electric Heat -- Thermostat controls fan in a call for heat. M22309 31 69-1726--1 Step 11. If you do not have a number 0190 on the left side of your display, go to the next page. If you have a number 0190 on the left side of your display, press the Up or Down arrow to select your setting for Installer Setup Number 0190. After you select your setting, press the Next button to go to the next Installer Setup Number. Period Wake Leave SETTING UP ARROW DOWN ARROW INSTALLER SETUP NUMBER Clock Go Back Next More Done GOES BACK TO LAST INSTALLER SETUP ADVANCE TO NEXT INSTALLER SETUP PRESS TO EXIT INSTALLER SETUP Installer Setup Number 0190 Installer Setup Name (Select Your Setting) Settings Heat Pump 0 - Changeover Valve in Cooling -Use this setting if you connected a Changeover wire labeled O to the O/B terminal. Valve 1 - Changeover Valve in Heating -Use this setting if you connected a wire labeled B to the O/B terminal. M22310 69-1726--1 32 Step 11. If you do not have a number 0240 on the left side of your display, go to the next page. After you select your setting, press the Done key to exit the Installer Setup and save your settings. The installation of the thermostat is complete. SETTING INSTALLER SETUP NUMBER Outside Saved Set To % UP ARROW DOWN ARROW Permanent Hold Clock Go Back Next More Done GOES BACK TO LAST INSTALLER SETUP ADVANCE TO NEXT INSTALLER SETUP PRESS TO EXIT INSTALLER SETUP Installer Setup Number 0640 Installer Setup Name Clock Format (Select Your Setting) Settings 12 - 12-hour clock format. 24 - 24-hour clock format. M22315 69-1726--1 38 Get to Know Your Thermostat Buttons Thermostat DOWN BUTTON LOWERS TEMPERATURE SETTING OR MAKES SELECTIONS IN OTHER SCREENS UP ARROW BUTTON RAISES TEMPERATURE SETTING OR MAKES SELECTIONS IN OTHER SCREENS PM System Fan System & Fan Schedule Clock & More SCHEDULE BUTTON SELECTS PROGRAMMING MODE SYSTEM & FAN BUTTON SELECTS FAN AUTO OR ON SELECTS HEAT, OFF, COOL AND EM HEAT CLOCK & MORE BUTTON SELECTS TIME AND FURNACE FILTER INFORMATION M22316 39 69-1726--1 Get to Know Your Thermostat Display Display SHOWS CURRENT DAY OF WEEK CURRENT TIME TEMPERATURE SETTING Mon System Schedule he Aux Clock & More M CURRENT SYSTEM SETTING CURRENT FAN SETTING INDICATES THERMOSTAT IS "CALLING FOR COOL OR HEAT" M22317 69-1726--1 40 Set System Setting Set System Setting Press the System button to select Heat, Off or Cool: Heat--Thermostat controls the heating system. Off--Heating and cooling systems are both off. Cool--Thermostat controls the cooling system. Heat (Heat Pump Systems with Auxiliary Heat)--Thermostat controls emergency heat and auxiliary heat, if needed. Heat Pump compressor is not operational. CAUTION Equipment Damage Hazard. Air conditioning compressor damage possible. Do not operate cooling system when outdoor temperature is below 50 °F (10 °C). Tue Set To System Auto Fan Auto Heat Off Cool System & Fan Schedule Clock & More M22304 41 69-1726--1 Set System Setting (Cont) Set Fan Setting 1. Press the Fan button to select Auto or On: Auto--Normal setting for most homes. The fan runs only when the heating or cooling system is on. Use this setting for improved air circulation or for more efficient air cleaning. System Auto Fan Auto Em Heat Off Cool FanUseEdit System & Fan CancelDone M22305 69-1726--1 42 Program Your Heating and Cooling Schedule Your thermostat can control up to four different schedule periods Monday through Friday and Saturday and/or Sunday : Wake--Period when you awaken and want your home at a comfortable temperature. [. . . ] Set the System setting to Cool and set the "Cool On" is not shown in temperature setting below the room the display. If "Cool On" is shown solidly in the display, but the cooling system does not turn on, see "Cooling system does not turn on" in the Troubleshooting Tips. "Wait" shows in Compressor minimum-off timer is active. Wait up to five minutes for the cooling or heating system to turn on. [. . . ]