User manual HONEYWELL SERIE 2000

[. . . ] Registered Trademark Copyright © 1996 Honeywell Inc. · All Rights Reserved 1 63-4356-1 63-4356--1 ENTER UNOCCUPIED PROGRAM MODE ENTER OCCUPIED PROGRAM MODE SET CURRENT DAY OR PROGRAM DAY SET OCCUPIED TEMPERATURE SETPOINTS SET UNOCCUPIED TEMPERATURE SETPOINTS AM Mon Occupied System Heat Room Fan Auto RETURNS TO NORMAL OPERATIONS Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp INCREASE TEMPERATURE OR TIME SETTING SET OVERRIDE TEMPERATURE OFFSET AND ACTIVATE TEMPORARY OVERRIDE Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continuous Unoccupied System Fan DECREASE TEMPERATURE OR TIME SETTING ENTER HOLD MODE SET CURRENT DAY AND TIME CLEAR PROGRAM PERIOD SELECT SYSTEM OPERATION COPY ONE PROGRAMMED DAY TO ANOTHER DAY SELECT FAN OPERATION CHANGE BETWEEN HEATING AND COOLING SETPOINTS M10256 63-4356--1 2 FEATURES · Program up to two Occupied and two Unoccupied time periods for each daily schedule. · Set different schedules for each day of the week. · Temporary temperature overrides. [. . . ] NOTE: Anytime a start time is not required, press the Clear Start Time. Set Program Start Time Press increase or decrease key until the current time is displayed. NOTE: Tapping the Set Current Day/Time will change the time in one hour increments. Set Day/Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Occupied Start Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Mon Occupied 1 Continous Unoccupied System Fan M4955A Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Tue Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4953B 7 63-4356--1 Press Day until the desired day is displayed. Set ProgramStart Time Press Occupied Start Time a second time to set a second Occupied Start Time. Set ProgramStart Time Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied AM Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 System Fan Occupied Start Time M4956A Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed Occupied 2 Continous Unoccupied System Fan M4958B Press increase or decrease key until the desired start time is displayed. NOTE: The program times are in fifteen minute intervals. (Example: 8:00, 8:15, 8:30). Set ProgramStart Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time PM Wed Occupied 2 Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4959A Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 Continous Unoccupied System Fan Press Unoccupied Start Time. M4957A Set Program Start Time Unoccupied Start Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Wed UnOccupied 1 Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4960A 63-4356--1 8 Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Press increase or decrease key until the desired start time is displayed. Set ProgramStart Time PM Wed UnOccupied 2 Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp PM Wed UnOccupied 1 Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Continous Unoccupied System Fan M4961A M4963A Press Unoccupied Start Time a second time to set a second Unoccupied Start Time. Set Program Start Time Copying a Day NOTE: The thermostat must be in the program mode to use the copy feature. Go to step 2 if the thermostat is already in the program mode. Unoccupied Start Time Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed UnOccupied 2 Continous Unoccupied System Fan M4962B Press Occupied Start Time. Set Program Start Time Occupied Start Time AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Tue Occupied 1 Continous Unoccupied System Fan M10255 9 63-4356--1 Press Day to select the day to be copied if different from the day displayed. Set Program Start Time Press Day until the day to be copied to is displayed. Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied Day Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied AM Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Set Program Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Clear Start Time Copy Heat/Cool Settings Wed Occupied 1 Wed Thu Clear Start Time Copy Heat/Cool Settings System Fan System Fan M4966A M4968A Press Copy. Copy Run Program Occupied Start Time Temporary Occupied Set Current Day/Time Continous Unoccupied Press Copy. Press Run Program. Run Program for all the start Occupied Temp Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Wed Occupied Heat Continous Unoccupied System Fan M10231 Press Temporary Occupied. AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A Temporary Occupied Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4980A 63-4356--1 14 Press increase or decrease key until the desired temperature offset is displayed (range is 0° to 5°F). Set Program Run Program Occupied Start Time Unoccupied Start Time Day Using Temporary Override Press Temporary Occupied. NOTE: The default temperature setting is the Occupied setpoint. Setting Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4981A Temporary Occupied Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Override Heat Press Run Program. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Continous Unoccupied System Fan M4982B Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A Press increase or decrease key to change the default setting by the offset (range is 0° to 5°F), if desired. 15 63-4356--1 NOTE: If the offset is zero, the default setting changes in one degree increments. If the offset is 1 through 5, the default setting changes by plus or minus the offset. Temporary AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Using Continuous Unoccupied Press Continuous Unoccupied. NOTE: The default temperature setting is the Unoccupied setpoint. The default appears for five seconds and then the display shows the room temperature. Setting Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Wed Override System Auto Fan Auto Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M4983B Continuous Unoccupied Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Heat Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Press Run Program to cancel the override. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day M4984B Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto Press increase or decrease key to change the default setting, if desired. Setting M4954A Set Program Run Program Occupied Start Time Unoccupied Start Time Day Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Heat Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan M10232A 63-4356--1 16 Press Heat/Cool Setpoint to change between heat and cool settings. Use increase or decrease key to adjust temperature settings. Press Run Program again to cancel the Hold and to return to the program. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Room NOTE: If or appear under the temperature display, it means that both the heating and cooling setpoints are being adjusted. Tapping the key will change both the heat and cool setpoints by one degree. Press Heat/Cool Settings after the desired setpoint is reached to review the settings. Temporary Setting Set Program Set Temperature Day Occupied Temp Unoccupied Temp Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A Run Program Occupied Start Time Unoccupied Start Time Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Occupied Heat Continous Unoccupied System Fan M4987B Changing Temperature Setpoint Until Next Program Period Press increase or decrease key until the desired temperature is displayed. Press Run Program to cancel the temporary setpoint and to return to the program. Run Program AM Set Program Run Program Occupied Start Time Unoccupied Start Time Day Room Set Temperature Occupied Temp Unoccupied Temp Change Time/Temp Temporary Occupied Set Current Day/Time Clear Start Time Copy Heat/Cool Settings Continous Unoccupied System Fan Mon Occupied 1 System Heat Fan Auto M4954A 17 63-4356--1 TROUBLESHOOTING GUIDE Symptom Display will not come on. Action · Check if the circuit breaker is tripped--reset the circuit breaker. · Check if the fuse is blown--replace the fuse. · Check if the system switch at the equipment is in the Off position-- set to the On position. · Check wiring between thermostat and HVAC equipment--replace any broken wires. [. . . ] · Check if the system switch at the equipment is in the Off position-- set to On position. · If 24 Vac is present, proceed with troubleshooting. · Wait five minutes for the system to respond. Wait a minute after seeing the flame or snowflake and then check the registers. System on indicator (flame=heat, snowflake=cool) is displayed, but no warm or cool air is coming from the registers. 19 63-4356--1 Home and Building Control Honeywell Inc. [. . . ]