User manual HONEYWELL T7516C

[. . . ] T7516A, B, C Energy Management System USER'S GUIDE Weekday/Weekend 7-day Programmable Heat and/or Cool Conventional and Heat Pump 1 69-1611 Welcome to the world of comfort and energy savings with your new Honeywell T7516A, B, C Energy Management Thermostat brought to you by your energy utility. This thermostat allows up to seven separate days of programming. You can set the thermostat to control the temperature in your home, your water heater, and another appliance (such as a swimming pool pump) according to your personal schedule and preferences. This thermostat keeps you comfortable, and saves you energy. [. . . ] Low batteries or power outages do not delete thermostat programming. 18 69-1611 NOTE: When setting a program time or temperature, the instructions direct you to "Press and hold until the display shows the desired time (or temperature). " This changes the setting quickly in the selected direction. Use this method when the change is large (for example, two hours, or ten degrees). Once the setting is close, press and release the key to move the setting one step at a time. Inputting Basic Program The most efficient way to program the thermostat is to first input a basic program for the entire week. Then, you can make changes to specific days to fit your needs. IMPORTANT Because this procedure can affect up to seven days of programming, be careful when making changes with multiple days selected. NOTES: -- If you delete all programming with the CLEAR key, the thermostat uses the default program. -- PGM is an indication that you are in programming mode. 19 69-1611 Step 1: Setting Basic Cooling Times and Temperatures. First program the MORN time and temperature, if desired, for the entire week. Device Press and release until the display shows PGM COOL. AM M15403 Day of Week Press and release until the display shows MON TUE WED THU FRI SAT SUN. Press and release until the display shows MORN. AM M15403 Time AM Period M15403 20 69-1611 Ahead Back Press and hold until the display shows the desired time. AM M15404 Warmer Cooler Press and hold until the display shows the desired temperature. AM M15405 21 69-1611 Program the DAY time and temperature, if desired, for the entire week. Time Period Press and release until the display shows DAY. M15406 Ahead Back Press and hold until the display shows the desired time. AM M15407 Warmer Cooler Press and hold until the display shows the desired temperature. AM M15408 22 69-1611 Program the EVE time and temperature, if desired, for the entire week. Time Period Press and release until the display shows EVE. M15409 Ahead Back Press and hold until the display shows the desired time. PM M15410 Warmer Cooler Press and hold until the display shows the desired temperature. PM M15411 23 69-1611 Program the NIGHT time and temperature, if desired, for the entire week. Time Period Press and release until the display shows NIGHT. M15412 Ahead Back Press and hold until the display shows the desired time. PM M15413 Warmer Cooler Press and hold until the display shows the desired temperature. PM M15414 24 69-1611 Step 2: Setting Basic Heating Times and Temperatures. First program the MORN time and temperature, if desired, for the entire week. Device Press and release until the display shows PGM HEAT. M15415 Day of Week Press and release until the display shows MON TUE WED THU FRI SAT SUN. M15415 Time Period Press and release until the display shows MORN. AM M15416 25 69-1611 Ahead Back Press and hold until the display shows the desired time. AM M15417 Warmer Cooler Press and hold until the display shows the desired temperature. AM M15418 26 69-1611 Program the DAY time and temperature, if desired, for the entire week. Time Period Press and release until the display shows DAY. M15419 Ahead Back Press and hold until the display shows the desired time. AM M15420 Warmer Cooler Press and hold until the display shows the desired temperature. AM M15421 27 69-1611 Program the EVE time and temperature, if desired, for the entire week. Time Period Press and release until the display shows EVE. M15422 Ahead Back Press and hold until the display shows the desired time. PM M15423 Warmer Cooler Press and hold until the display shows the desired temperature. PM M15424 28 69-1611 Program the NIGHT time and temperature, if desired, for the entire week. Time Period Press and release until the display shows NIGHT. PM M15425 Ahead Back Press and hold until the display shows the desired time. PM M15425 Warmer Cooler Press and hold until the display shows the desired temperature. PM M15426 29 69-1611 Step 3: Setting Basic Water Times and On/Off Settings. First program the MORN time and on/off setting, if desired, for the entire week. Device Press and release until the display shows PGM WATER. Press and release until the display shows MON TUE WED THU FRI SAT SUN. PM M15427 Day of Week PM M15427 Time Period Press and release until the display shows MORN. AM M15428 30 69-1611 Ahead Back Press and hold until the display shows the desired time. AM M15429 Water On-Off-Clr Press and release until the display shows the desired on/off setting. AM M15429 31 69-1611 Program the DAY time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows DAY. M15430 Ahead Back Press and hold until the display shows the desired time. AM M15431 Water On-Off-Clr Press and hold until the display shows the desired on/off setting. AM M15431 32 69-1611 Program the EVE time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows EVE. M15432 Ahead Back Press and hold until the display shows the desired time. PM M15433 Water On-Off-Clr Press and hold until the display shows the desired on/off setting. PM M15433 33 69-1611 Program the NIGHT time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows NIGHT. PM M15434 Ahead Back Press and hold until the display shows the desired time. PM M15434 Water On-Off-Clr Press and hold until the display shows the desired on/off setting. PM M15434 34 69-1611 Step 4: Setting Basic Appliance Times and On/Off Settings. First program the MORN time and on/off setting, if desired, for the entire week. Device Press and release until the display shows PGM APPL. PM M15443 Day of Week Press and release until the display shows MON TUE WED THU FRI SAT SUN. Press and release until the display shows MORN. PM M15443 Time AM Period M15436 35 69-1611 Ahead Back Press and hold until the display shows the desired time. AM M15437 Appl On-Off-Clr Press and hold until the display shows the desired on/off setting. AM M15437 36 69-1611 Program the DAY time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows DAY. M15438 Ahead Back Press and hold until the display shows the desired time. AM M15439 Appl On-Off-Clr Press and hold until the display shows the desired on/off setting. AM M15439 37 69-1611 Program the EVE time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows EVE. M15440 Ahead Back Press and hold until the display shows the desired time. PM M15441 Appl On-Off-Clr Press and hold until the display shows the desired on/off setting. PM M15441 38 69-1611 Program the NIGHT time and on/off setting, if desired, for the entire week. Time Period Press and release until the display shows NIGHT. M15442 Ahead Back Press and hold until the display shows the desired time. PM M15443 Appl On-Off-Clr Press and hold until the display shows the desired on/off setting. PM M15443 Changing Parts of the Program After you input the basic program for the entire week, make changes to specific days to tailor the program to fit your needs. 39 IMPORTANT Because this procedure can affect up to seven days of programming, be careful when making changes with multiple days selected. 69-1611 Step 5: Changing Individual Cooling Times and Temperatures. The following example illustrates modifying the Sunday Morning Cooling program. First, select COOL, and the desired day and period for the change. Device Press and release until the display shows PGM COOL. PM M15414 Day of Week Press and release until the display shows the desired day(s). Press and release until the display shows the desired period. PM M15445 Time AM Period M15444 40 69-1611 Adjust the time that the period begins. Ahead Back Press and hold until the display shows the desired time. AM M15446 Warmer Cooler Press and hold until the display shows the desired temperature. AM M15448 OR Delete the programming from the period for the days shown on the display. Press and release. Clear M15447 41 69-1611 Step 6: Changing Individual Heating Times and Temperatures. The following example illustrates modifying the Saturday Day Heating program. First, select HEAT, and the desired day and period for the change. Device Press and release until the display shows PGM HEAT. PM M15426 Day of Week Press and release until the display shows the desired day(s). Press and release until the display shows the desired period. AM M15449 Time AM Period M15450 42 69-1611 Adjust the time that the period begins. Ahead Back Press and hold until the display shows the desired time. M15451 Warmer Cooler Press and hold until the display shows the desired temperature. M15452 OR Delete the programming from the period for the days shown on the display. Press and release. Clear M15453 43 69-1611 Step 7: Changing Individual Water Times and On/Off Settings. The following example illustrates modifying the Saturday Evening Water program. First, select WATER, and the desired day and period for the change. Device Press and release until the display shows PGM WATER. Press and release until the display shows the desired day(s). Press and release until the display shows the desired period. AM M15431 Day of AM Week M15454 Time Period PM M15455 44 69-1611 Adjust the time that the period begins. Ahead Back Press and hold until the display shows the desired time. PM M15456 Water On-Off-Clr Press and release until the display shows the desired on/off setting. PM OR Delete the programming from the period for the days shown on the display. Clear M15458 Press and release. The WATER indication shows neither on nor off. M15457 45 69-1611 Step 8: Changing Individual Appliance Times and On/Off Settings. The following example illustrates modifying the Saturday Day Appliance program. First, select APPL, and the desired day and period for the change. Device Press and release until the display shows PGM APPL. AM M15436 Day of Week Press and release until the display shows the desired day(s). Press and release until the display shows the desired period. AM M15459 Time AM Period M15460 46 69-1611 Adjust the time that the period begins: Ahead Back Press and hold until the display shows the desired time. AM M15481 Appl On-Off-Clr Press and release until the display shows the desired on/off setting. AM OR Delete the programming from the period for the days shown on the display: Clear M15483 Press and release. [. . . ] Thermostat displays: "bUSY". 65 69-1611 Personal Programming Charts Table 3. Morning Cool Mon Tue Wed Thur Fri Sat Sun Time Setting Time Day Setting Evening Time Setting Night Time Setting 66 69-1611 Table 4. Morning Heat Mon Tue Wed Thur Fri Sat Sun Time Setting Time Day Setting Evening Time Setting Night Time Setting 67 69-1611 Table 5. Morning Water Mon Tue Wed Thur Fri Sat Sun NOTE: The On setting refers to enabling the operating mode; you cannot program a water heater "on". [. . . ]