User manual HONEYWELL T8665A

[. . . ] T8665A Chronotherm® IV Wireless Thermostat USER'S GUIDE 1 69-1536-3 69-1536­3 2 69-1536­3 CONTENTS USING THIS GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KEYBOARD AND DISPLAY DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press setpoint of the mode not currently in use. INFORMATION KEY M20150 key twice to check the temperature Cool M20152 Press key once to display current setpoint. Example display shows cooling setpoint of 75°. 23 69-1536­3 Display or Reset Filter Timer Settings When the thermostat activates a timer, the thermostat flashes Filter until the timer resets. Reset the timer by pressing the i key until the expired timer is displayed. Note: You can view the number of days remaining at any time by pressing the i key three or four times. If more than one timer is active, all active timers show sequentially when pressing the i key several times. If you want to use this feature and it is not currently activated, check the Installation Instructions at www. honeywell. com/yourhome or call 1-800-4681502. Filter Days M20243 2. Press the Timer key to reset the timer. Filter Days M20244 24 69-1536­3 SETTING THE CLOCK Setting Current Day and Time On initial power up or after an extended power loss, "1:00 PM" flashes on the display until a key is pressed. Press Set Current Day/Time key. Set Current Day/Time Set Day/Time PM Mon M14580 Press Set Current Day/Time key to show information displayed. IMPORTANT Always press the keys with your fingertip or similar blunt tool. Sharp instruments like pens and pencil points can damage the keyboard. 25 69-1536­3 2. Press Day key until the current day displays. Day Set Day/Time PM 70 80 60 90 90 70 80 Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday, Sat = Saturday, Sun = Sunday. Tue M14581 3. Press Run Program key to return to normal operation. Run Program 60 60 Press Day key to set the current day. Example display shows Tuesday. or Time key until the current time displays. 70 80 90 70 80 Tap the Set Current Day/Time key to advance the time in one-hour increments. Set Current Day/Time Set Day/Time AM Tue M14582 Press Time or Time key to set the current time. Example display shows 8:15 AM. 26 69-1536­3 Daylight Saving Time NOTE: If the current time is Daylight Saving Time, press Daylight Time key to display "DST. " Daylight Time Set Day/Time AM Tue DST M14583 Press Daylight Time key to set Daylight Saving Time. 70 80 60 90 90 70 80 Pressing Daylight Time key more than once within a five minute period scrolls you through various time options (example: one hour earlier or later with or without DST). Pressing Daylight Time key six times in a five minute period returns you to your original setting. 60 27 69-1536­3 PROGRAMMING YOUR THERMOSTAT 7-Day Program and Operation Your thermostat is 7-day programmable. 7-day programming means you can set your thermostat for four periods (Wake, Leave, Return and Sleep) and up to eight temperatures (four Heat and four Cool) for each day of the week. Program Periods: WAKE The program period when you want the house at a comfortable temperature when you get up and while you get ready for work or school. (This is a higher temperature during the heating season and a cooler temperature during the cooling season. ) LEAVE The program period you can set for an energy saving temperature while you are away at work or school. (This is a lower temperature during heating season, and higher temperature during cooling season) and it follows the WAKE period. RETURN The program period when you want the house at a comfortable temperature for activities before bedtime. (This is a higher temperature during the heating season and a cooler temperature during the cooling season) and it follows the energy-saving LEAVE period. SLEEP The program period you set for an energy-saving temperature while you are sleeping. [. . . ] If the product is defective, (i) return it, with a bill of sale or other dated proof of purchase, to the retailer from which you purchased it, or (ii) package it carefully, along with proof of purchase (including date of purchase) and a short description of the malfunction, and mail it, postage prepaid, to the following address: Honeywell Return Goods Dock 4 MN10-3860 1885 Douglas Drive North Golden Valley, MN 55422 This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer. Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. [. . . ]