User manual HONEYWELL T8700C

[. . . ] T8700C An Electronic RoundTM Programmable Thermostat OWNER'S GUIDE 1 69-1099 69-1099 Congratulations on the purchase of your new thermostat!Over 100 years of Honeywell engineering expertise went into the making of this thermostat in an effort to provide you with a more comfortable and convenient living environment. [. . . ] SLEEP is the time period you can set for an energy-savings temperature while you are sleeping. NOTE: The heating and cooling program times are the same. Changing your cooling WAKE time also changes your heating WAKE time. 4 69-1099 The following sequence uses the heating program as an example. To change to the cooling program, move the System switch to the COOL position and enter the cooling temperature settings. b. AM Press or to set desired WAKE time. SET AM 3. To change the preprogrammed time/temperature settings, follow steps 2 through 6. If not, press the key until End is displayed or the thermostat will automatically return to normal operational mode within five minutes. 5 Press or to set desired WAKE temperature. 69-1099 4. b. PM Press or to set desired SLEEP time. SET 5. End is displayed for five seconds indicating PM the end of programming. The thermostat then displays current time and room temperature. Press or to set desired SLEEP temperature. 6 69-1099 OPERATING YOUR THERMOSTAT Display Temperature Setting. Press or once SET to display present PM temperature setting. After approximately five seconds the thermostat displays current time/temperature. The TEMPORARY change is TEMPORARY AM in effect until the next program period. To cancel your TEMPORARY change, press until End is displayed. Hold Function. To hold the thermostat at one temperature indefinitely, program both WAKE and SLEEP to the same temperature. Temporary Change. a. [. . . ] Registered Trademark Printed in U. S. A. on recycled paper containing at least 10% post-consumer paper fibers. [. . . ]