User manual HONEYWELL TMVL-X

[. . . ] Place this humidifier in an area where it is not accessible to children. Do not place the humidifier near any heat sources such as stoves, radiators, and heaters. Before using the humidifier, check the power cord for any signs of damage. If the cord is found to be damaged, DO NOT USE and return the humidifier to the manufacturer under the warranty agreement for repair. [. . . ] · Now that your Humidistat knob is set, the humidifier will automatically turn back on when your room drops below your comfort setting and will automatically turn off again when the setting is reached. NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Advanced Mist to the end (Fig. The Desired Humidity light Humidistat may be set too low. Turn the dial clockwise will turn Off when the unit is producing moisture. When the Desired Humidity light turns ON, you have reached optimal humidity. TM Fig. 5 Power Light (Illuminated) Desired Humidity Light (Illuminated) 5 EasySetTM Control Operation (Models HCM-635, HCM-645, HCM-646) POWER CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN ELECTRICAL SHOCK COULD OCCUR. · With the power OFF, plug the filled humidifier into a polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way. Fig. 6 Humidistat Control STEP 1: POWER · Press the Power button to start the humidifier. Your humidifier will automatically start on High power, continuous run (Fig. · To turn your humidifier OFF simply press the Power button again. Power Button Fan Speed Control S T E P 2 : O U T P U T / F A N S P E E D C O N T R O L Fig. NOTE: If you wish to change your timer setting or check to see how much time is left simply press the timer button once and it will show you the time left. If you want to change the time remaining, continue to push the button up or down until you have reached your desired time. Again, after 3 seconds the display will revert to showing the current room humidity. 7 Fig. 11 Digital EasySetTM Control Operation (Model HCM-650) STEP 4: SET HUMIDITY · You can set your desired humidity in 1% increments anywhere from 30% to 60%. · To set your desired humidity, press the humidity button up or down (Fig. · When the display indicates your desired humidity setting wait 3 seconds. · After 3 seconds your desired humidity is set and the display will revert back to showing the current room humidity. NOTE: If you wish to change your humidity setting or check to see what you set, simply press the humidity button once and it will show you the set humidity. If you want to change it, continue to push the button up or down until you have Fig. Again, after 3 seconds the display will revert to showing the current room humidity. · Once you have set your humidity the unit will operate under this desired setting until the unit is turned off. [. . . ] Q: The Advanced Mist Humidistat knob was set according to the manual, but the humidifier never seems to turn off. TM A: The Humidistat knob may be set too high. Reset the Advanced Mist Humidistat knob following the instructions under FEATURES. Q: My filter has turned light brown and rust colored. [. . . ]