User manual HONEYWELL V2410

[. . . ] LOCKSHIELD VALVE WITH MEASURING FACILITY PRODUCT DATA V2410 Verafix-MES-II Application 1/2 The Verafix-MES-II is a radiator lockshield valve with measuring support for the supply or return of radiators or heat exchangers. It is used for measuring, shutoff and draining/filling of individual radiators in two-pipe heating systems. [. . . ] The valve is supplied set to measuring range II. For correct measurements the right measuring range or kvvalue has to be fed into the measuring device. NOTE: Measuring and pre-setting at the same time can only be done when a pre-settable TRV body is installed, e. g. Shutoff: The return of the radiator can be shutoff by closing the valve insert. Draining: Draining or filling of the radiator is carried out with the draining adapter (see `Accessories'). Draining of individual radiators using the Verafix-MES-II has no influence on the heating loop or other radiators in the loop. Detailed illustrations of above functions see chapter Shutoff/ Draining and Change to Measuring Range I Please Note: · To avoid stone deposit and corrosion the composition of the medium should conform with VDI-Guideline 2035 · Additives have to be suitable for EPDM sealings · System has to be flushed thoroughly before initial operation with all valves fully open · Any complaints or costs resulting from non-compliance with above rules will not be accepted by Honeywell · Please contact us if you should have any special requirements or needs Dimensions and Ordering Information l Fig. Dimensions and OS-Nos (OS=Ordering System) Type Angle (Fig. 1) DN 10 15 20 10 15 20 Pipe connection Rp 3/8" Rp 1/2" Rp3/4" Rp 3/8" Rp 1/2" Rp3/4" kvs(cv)-value 0. 2/1. 0(0. 23/1. 17) 0. 2/1. 0(0. 23/1. 17) 0. 2/1. 0(0. 23/1. 17) 0. 2/0. 8 (0. 23/0. 94) 0. 2/0. 9 (0. 23/1. 05) 0. 2/1. 0(0. 23/1. 17) L 52 58 66 75 80 91 Dimensions in mm I H h 26 25 22 29 25 26 34 29 29 49 32 -- 51 32 -- 59 32 -- OS-No. V2410E0010 V2410E0015 V2410E0020 V2410D0010 V2410D0015 V2410D0020 Straight (Fig. 2) NOTE: All dimensions in mm unless stated otherwise. Installation Examples Fig. Installation example heating system Fig. [. . . ] 2) DN 10 I II 0. 2 (0. 23) 1. 0 (1. 17) 0. 2 (0. 23) 0. 8 (0. 94) DN 15 I II 0. 2 (0. 23) 1. 0 (1. 17) 0. 2 (0. 23) 0. 9 (1. 05) DN 20 I II 0. 2 (0. 23) 1. 0 (1. 17) 0. 2 (0. 23) 1. 0 (1. 17) Honeywell Subject to change 5 EN0H-2201GE25 R1106 V2410 - VERAFIX-MES-II Automation and Control Solutions Honeywell GmbH Hardhofweg 74821 Mosbach, Germany Phone: +49 (6261) 810 Fax: +49 (6261) 81393 www. honeywell. com EN0H-2201GE25 R1106 November 2006 © 2006 Honeywell International Inc. Subject to change · All rights reserved Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland or by its Authorized Representative. [. . . ]