User manual HONEYWELL VENUS SERIES LOCKSHIELD DATASHEET

[. . . ] [. . . ] 0. 20 bar (2. 9 psi) recommended for quiet operation Design The lockshield valves consist of: · Valve housing PN10, DN10 or DN15 with · internal thread connection to ISO228 on inlet · external thread connection with union-nut and radiator tailpiece on outlet · angle and straight bodies with dimensions according so EN215, Appendix A, Series F · Valve insert · Protection cap · Union-nut and radiator tailpiece Materials · Valve housing made of nickel-plated brass · Valve insert made of brass with EPDM O-rings and soft seals and stainless steel spindle · Protection cap made of grey plastic · Union-nut and tailpiece made of nickel plated brass with EPDM O-ring Honeywell Subject to change EN0H-2205GE25 R1106 V340 - VENUS SERIES LOCKSHIELD VALVES Dimensions and Ordering Information Fig. Available versions and OS-Nos (OS=Ordering System) Versions Angle (Fig. 2) DN 10 15 10 15 NOTE: Dimensions d1 Rp 3/8" Rp 1/ 2" d2 Rp 3/8" Rp 1/ 2" I1 20 23 25 29 l 49 53 75 82 h 21. 5 21. 5 23 23 OS-No. V340E010 V340E015 V340D010 V340D015 Rp 3/8" Rp 1/2" Rp 3/8" Rp 1/2" All dimensions in mm unless stated otherwise. Please Note: · To avoid stone deposit and corrosion the composition of the medium should conform with VDI-Guideline 2035 · Additives have to be suitable for EPDM sealings · System has to be flushed thoroughly before initial operation with all valves fully open · Any complaints or costs resulting from non-compliance with above rules will not be accepted by Honeywell · Please contact us if you should have any special requirements or needs Accessories Connections Compression ring and nut 1/2" x 10 mm 1/2" x 12 mm 1/2" x 14 mm 1/2" x 15 mm 1/2" x 16 mm NOTE: VA620A1510 VA620A1512 VA620A1514 VA620A1515 VA620A1516 Support inserts have to be used for copper or soft steel pipe with 1. 0 mm wall thickness 1/2" x 12 mm 1/2" x 15 mm 1/2" x 16 mm VA621A1512 VA621A1515 VA621A1516 Compression ring and nut with support insert (2 pcs each) NOTE: Support inserts have to be used for copper or soft steel pipe with 1. 0 mm wall thickness Compression ring and nut with support insert for composite pipe (2 pcs each) 1/2" x 14 mm 1/2" x 16 mm VA622B1514 VA622B1516 EN0H-2205GE25 R1106 2 Honeywell Subject to change V340 - VENUS SERIES LOCKSHIELD VALVES Flow Diagram Honeywell Subject to change 3 EN0H-2205GE25 R1106 V340 - VENUS SERIES LOCKSHIELD VALVES Automation and Control Solutions Honeywell GmbH Hardhofweg 74821 Mosbach, Germany Phone: +49 (6261) 810 Fax: +49 (6261) 81393 www. honeywell. com EN0H-2205GE25 R1106 November 2006 © 2006 Honeywell International Inc. [. . . ] [. . . ]