User manual HONEYWELL XI581

[. . . ] XI581 / XI582 BUSWIDE OPERATOR INTERFACE USER GUIDE Software License Advisory This document supports software that is proprietary to Honeywell Inc. Before software delivery, the end user must execute a software license agreement that governs software use. Software license agreement provisions include limiting use of the software to equipment furnished, limiting copying, preserving confidentiality, and prohibiting transfer to a third party. Disclosure, use, or reproduction beyond that permitted in the license agreement is prohibited. Copyright © 2009 Honeywell Inc. [. . . ] Press Enter () to complete the selection. RESULT: The 'Data Points' screen appears. User Address is highlighted by default. Data Points User Address Manual Operation Accumul. Runtime Type Selection Points in Trend Suppress Alarm Add Template Delete Template Modify Template Template Search 2. Press Enter () to select User Address. User Address Exhaust_fan Hall_main_lights Main_water_meter Conf_room_temp 1 On 000 23 m3 °C 1 NOTE: All user addresses for points may not be able to appear in the display window at the same time. 3. Use the arrow keys to move to and highlight the desired point. Press Enter () to complete the selection. RESULT: The display window shows the description of the point you selected. The information that appears in a point description varies depending on the type of point you selected (digital, analog, or totalizer). The table in the beginning of this "Data Point Description" section describes the various attributes. Use the following steps to modify an attribute for the selected point: a. Use the arrow keys to move to and highlight the field. The field begins blinking and is no longer highlighted. Press the plus or minus keys to toggle or increment/decrement attribute. When done modifying the point description, press Cancel (C) to return to the point user address list. When you are finished, repeatedly press Cancel (C) to return to the main menu. 55 EN2B-0126GE51 R0309 ALPHABETIC REFERENCE XI581/XI582 BUSWIDE OPERATOR INTERFACE Selecting Points by Template Purpose Access level Select "Data Points" To find and display points that conform to a template and modify their attributes. All users can display point information. You must have access level 3 to modify point attributes. At the main menu, use the arrow keys to move to and highlight Data Points. Press Enter () to complete the selection. RESULT: The 'Data Points' screen appears. User Address is highlighted by default. Data Points User Address Manual Operation Accumul. [. . . ] Press Enter () to complete the selection. RESULT: The 'System Data' screen displays four possible options (depending on access level). Access level Select "System Data" System Data System Info HW-Interface Config. Use the arrow keys to move to and highlight HW-Interface Config. Then press Enter () to complete the selection. [. . . ]