User manual HOOVER A2135

[. . . ] Always pull out the plug ­ if the appliance malfunctions during operation ­ before cleaning and maintenance ­ after use ­ when changing the filter. Never unplug the appliance by pulling at the cable, but only by removing the plug directly from the socket. Ensure that the main cable is not exposed to either heat or chemical substances, nor that it is pulled across sharp edges or surfaces. [. . . ] the information provides important points for the safe use and the maintenance of the appliance. Please keep these operating instructions in a safe place and provide them to the next owner. 1 = Collecting bin 2 = Motor block 3 = Snap fasteners 4 = Castor wheels 5 = On/Off switch 6* = Power Tool Socket 8 = Hose connection 9 = Carrying handle 10 = Mains cable 11* = Suction control 12* = Flexible hose 13* = Suction tubes 15 = Upholstery nozzle 15a*= Reduction piece 16* = Carpet + floor nozzle 17* = Crevice Tool 18* = Drain Clearing nozzle 20 = Foam premotor filter 21 = Paper premotor filter 22 = Clamping ring 23 = Footring 24 = Dust paper bag 25* = Parking hook 26* = Suction tube ­ park position * Feature varies according to model Accessories or to the cable (special cable required); have repairs done only by an authorised customer service station, because modifications to the appliance can pose a risk to your health. Ensure that only original spare parts and accessories are used. After wet vacuuming, empty the collecting bin immediately. After wet vacuuming, the appliance must be absolutely dry; dry off the flexible hose or tubes if necessary beforehand. Never dry vacuum without filters or with damaged filters. D Assemble the foam premotor filter, premotor paper filter and clamping ring and fasten them with the locking clips. Press the filter bag on the suction connection firmly and lay it against the wall of the collecting bin. In such cases, vacuum only in partial amounts and intermittently empty the collecting bin. Lift the tube and flexible hose out of the liquid first and then turn off the appliance afterwards, in order to prevent an overflow of liquid. After completion of wet vacuuming, please clean and dry the appliance and the accessories used. Sudden reduction in suction power - Has the float stopped the flow of air?This can happen if the appliance is standing at a slant or if the appliance falls over. Turn off the vacuum cleaner ­ the float will fall back into place ­ the appliance is ready for use again. The motor does not function: - Is there damage to the mains cable, plug or socket?To obtain approved HOOVER service and genuine HOOVER parts, please call: Gias Customer Service 08705400600 or your nearest Hoover Service Centre. Ensure that all service and repairs are carried out by an authorised Hoover Service Engineer. [. . . ] Ensure that all service and repairs are carried out by an authorised Hoover Service Engineer. Always identify your cleaner by the complete model number when requesting information or ordering parts. (The model number appears on the back of the cleaner body. [. . . ]